Artillery training tables

TC 3-09.8

Field Artillery Gunnery

November 2013

DISTRIBUTION RESTRICTION: Distribution is authorized to US Government agencies only to protect technical or operational information. This determination was made on 28 August 2012. Other request for this document will be referred to Commandant, US Army Artillery School, ATTN: ATSF-DT, Fort Sill, OK 73503-5600.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of this document.

Headquarters, Department of the Army

This publication is available at Army Knowledge Online (https://armypubs.us.army.mil/doctrine/index.html).

To receive publishing updates, please subscribe at http://www.apd.army.mil/AdminPubs/new_subscribe.asp.

DISTRIBUTION RESTRICTION: Distribution is authorized to US Government agencies only to protect technical or operational information. This determination was made on 28 August 2012. Other request for this document will be referred to Commandant, US Army Artillery School, ATTN: ATSF-DT, Fort Sill, OK 73503-5600.

DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of this document.

15 November 2013 TC 3-09.8 i

TC 3-09.8 Training Circular No. 3-09.8

Headquarters

Department of the Army Washington, DC, 15 November 2013

Field Artillery Gunnery

Contents Page

PREFACE ...................................................................................................................... x Chapter 1 Introduction ............................................................................................................... 1-1

Qualification Methodology ........................................................................................... 1-1 Scope .......................................................................................................................... 1-2

General Content .......................................................................................................... 1-2 Standardization ........................................................................................................... 1-2 Single Sources ............................................................................................................ 1-3 Task-Based Training Strategy .................................................................................... 1-3 Battle Focus ................................................................................................................ 1-3 Mission essential Task List ........................................................................................ 1-3 Commander’s Assessment ......................................................................................... 1-3 Section I – Training Strategy ....................................................................................... 1-5 Gunnery Tables ........................................................................................................... 1-5 Section II – Commander’s Guidance .......................................................................... 1-7 Training Goals ............................................................................................................. 1-7 Training Requirements ................................................................................................ 1-7 Section III – Training Plans ......................................................................................... 1-8 Gunnery Training ........................................................................................................ 1-8 Long-Range Training Plans ........................................................................................ 1-9 Short-Range Training Plans ........................................................................................ 1-9 Near-Term Training Plans ......................................................................................... 1-10

Chapter 2 Safety ......................................................................................................................... 2-1 Section I – Certification, Battle Focus, Duties, and Responsibilities .......................... 2-1 Certification ................................................................................................................. 2-1 Battle Focus ................................................................................................................ 2-2 Responsibilities and Duties ......................................................................................... 2-2 Section II – Procedures ............................................................................................... 2-5

Contents

ii TC 3-09.8 15 November 2013

Cannon Safety ............................................................................................................ 2-5 Cannon Safety Aids .................................................................................................... 2-6 Section III – Manual Computation of Safety Data ..................................................... 2-12 Manual Safety Computation Procedure .................................................................... 2-12 Safety Card ............................................................................................................... 2-12 Basic Safety Diagram ............................................................................................... 2-13 Computation of Low angle Safety Data .................................................................... 2-15 Safety T ..................................................................................................................... 2-19 Updating Safety Data After Determining a GFT Setting ........................................... 2-21 Determination of Maximum Effective Illumination Area ............................................ 2-33 Safety Considerations for M549/M549A1 RAP ......................................................... 2-34 Safety Considerations for M864 Base Burn DPICM/M79541 Base Burn HE ........... 2-35 Computation of High angle Safety Data................................................................... 2-35 Section IV – Determining Minimum Quadrant Elevation ........................................... 2-44 Minimum Quadrant Elevation .................................................................................... 2-44 Section V – MLRS Safety Procedures ...................................................................... 2-51 Section VI – Computation of MLRS/HIMARS Safety Data ....................................... 2-53 General ..................................................................................................................... 2-53 MLRS Surface Danger Zone Values ......................................................................... 2-55 Computing Safety Data ............................................................................................. 2-55 Section VII – Check Data for M270A1/HIMARS/M142 HIMARS .............................. 2-83 M270A1, MLRS, M142 HIMARS, ............................................................................. 2-83

Chapter 3 13F Fire Support Tables ........................................................................................... 3-1 Section I – ASPT for Fire Support ............................................................................... 3-1 Section II – Fire Support Tables ............................................................................... 3-16 Fire Support table I: Individual Tasks ........................................................................ 3-16 Fire Support Table II: Establish Operations .............................................................. 3-58 Fire Support Table III: Fire Planning ......................................................................... 3-64 Fire Support Table IV: Execute Fires ........................................................................ 3-90 Fire Support Table V: Mounted Gunnery Training Program ................................... 3-104 Observer Table VI ................................................................................................... 3-105 Fires Cell Table VI ................................................................................................... 3-105 Chapter 4 13B/13M Delivery Section Training ......................................................................... 4-1 Section I – Howitzer Section Tables ........................................................................... 4-1 ASPT for Howitzer Sections ........................................................................................ 4-2 Requirements .............................................................................................................. 4-2 Howitzer Table I: Individual Tasks ......................................................................... 4-28 Howitzer Table II: Rigging Procedures ..................................................................... 4-41 Howitzer Table III: Establish Operations ................................................................... 4-48 Howitzer Table IV: Execute Fires .............................................................................. 4-56 Howitzer Table V: Section Certification..................................................................... 4-61 Table VI: Section Qualification .................................................................................. 4-62 Section II – MLRS Section Tables ............................................................................ 4-62 Training With MLRS Tables .................................................................................... 4-62 Requirements ........................................................................................................... 4-63 Test Stations ............................................................................................................. 4-67

Contents

15 November 2013 TC 3-09.8 iii

MLRS Tables ............................................................................................................ 4-75 MLRS Table I: Individual Soldier and Leader Tasks ................................................. 4-75 MLRS Table II: Conduct MLRS Firing Section OPAREA Occupation ...................... 4-84 MLRS Table III: Prepare HIMARS for Air Movement ................................................ 4-86 MLRS Table IV/A: Launcher Reload Procedures ..................................................... 4-87 MLRS Table IV/B: Ammunition Upload/Download Procedures ................................ 4-89 MLRS Table V: Training and Certification ................................................................ 4-92 MLRS Table VI: Qualification .................................................................................... 4-94

Chapter 5 13R Radar Section Tables ........................................................................................ 5-1 Section I – ASPT for Radar Sections .......................................................................... 5-1 Test Station 1: Map and Aiming Circle Orientation ..................................................... 5-5 Test Station 2: Initialize the Radar .............................................................................. 5-9 Test Station 3: Establish Communications ............................................................... 5-10 Section II – Radar Tables ......................................................................................... 5-12 Radar Table IA: Individual Tasks .............................................................................. 5-12 Radar Table IB: Individual Leader Tasks .................................................................. 5-18 Radar Table II: LCMR (Lightweight Counter-Mortar Radar) ..................................... 5-20 Radar Table III: RSOP (Reconnaissance, Selection, and Occupation of (Position) 5-22 Radar Table IV: Perform Radar Operations ............................................................. 5-26 Radar Table V: Certification ...................................................................................... 5-29 Radar Table VI: Qualification .................................................................................... 5-29

Chapter 6 13D/13P Fire Direction Tables ................................................................................. 6-1 Training With Fire Direction Tables ............................................................................. 6-1 ASPT for FDC/POC/BOC ........................................................................................... 6-1 Requirements .............................................................................................................. 6-1 Fire Direction Table I: Individual Leader and Soldier Tasks ..................................... 6-11 Fire Direction Table II: Establish Operations ............................................................ 6-16 Fire Direction Table III: Compute Firing Data ........................................................... 6-23 Fire Direction Table IV: Provide Control of the FDC ................................................. 6-31 Fire Direction Table V: Certification .......................................................................... 6-34 Fire Direction Table VI: Qualification ........................................................................ 6-34

Chapter 7 13T Survey/Meteorological (MET) Crewmember Tables ....................................... 7-1 Section I – ASPT for Survey/MET Sections ................................................................ 7-1 Test Station 1 Written Exam ....................................................................................... 7-5 Test Station 2: Basic MET Skills ................................................................................. 7-6 Test Station 3: Survey Skills ....................................................................................... 7-9 Section II – Survey/MET Tables ............................................................................... 7-13 Survey/MET Table I: Individual Tasks ...................................................................... 7-13 Survey/MET Table II: Establish Operations .............................................................. 7-28 Survey/MET Table III: Survey/MET Planning and Coordination ............................... 7-31 Survey/MET Table IV: Perform Survey/MET Missions ............................................. 7-32 Survey/MET Mission Scenario #1: Occupy an Existing Fire Base ........................... 7-34 Survey/MET Mission Scenario #2: Occupy an Unsecure Fire Base ........................ 7-36 Survey/MET Table V: Survey/MET Training and Certification .................................. 7-38 Survey/MET Table VI: Survey/MET Qualification ..................................................... 7-38

Contents

iv TC 3-09.8 15 November 2013

Chapter 8 Collective FA Gunnery Training .............................................................................. 8-1 Section I – Evaluation ................................................................................................. 8-1 Concept ...................................................................................................................... 8-1 General ....................................................................................................................... 8-1 Artillery Table VII: Platoon RSOP ............................................................................... 8-2 Artillery Table VIII: Move ............................................................................................. 8-3 Artillery Table IX: Conduct Occupation of a Position Area and Establish a Firing

Capability .................................................................................................................... 8-4 Artillery Tables X–XII: Platoon Training, Certification, and Qualification .................. 8-10 Artillery Tables XII–XV: Battery Training, Certification, and Qualification ................ 8-23 Artillery Tables XVI–XVIII: Battalion Training, Certification, and Qualification ......... 8-24 Collective Gunnery Training in Support of Combined Arms Training ....................... 8-24

Appendix A JADOCS .................................................................................................................... A-1 Appendix B Minimum QE Rapid Fire Tables .............................................................................. B-1

Appendix C Sample Hands-On and Written Examinations ....................................................... C-1

Appendix D Time & Accuracy Standards ................................................................................... D-1 Appendix E Gunner's Qualification Test ..................................................................................... E-1

Appendix F M28A1/A2 Rocket Crest Clearnance ....................................................................... F-1

GLOSSARY ................................................................................................... Glossary-1 REFERENCES ...........................................................................................References-1 INDEX .................................................................................................................. Index-1

Figures Figure 2-1. Emplacing safety stakes for M119A2 ............................................................................... 2-7 Figure 2-2. Boxed safety ..................................................................................................................... 2-9 Figure 2-3. Unboxed safety ............................................................................................................... 2-10 Figure 2-4. Combat safety ................................................................................................................. 2-11 Figure 2-5. Illumination safety ........................................................................................................... 2-11 Figure 2-6. Example range safety card ............................................................................................. 2-13 Figure 2-7. Example of a completed safety diagram (HE/WP/SMK) ................................................ 2-15 Figure 2-8. Low angle safety matrix .................................................................................................. 2-18 Figure 2-9. Example low angle safety matrix (shell HE/WP/SMK) ................................................... 2-18 Figure 2-10. Example of a completed Safety T................................................................................. 2-19 Figure 2-11. Example of post occupation low angle safety with Range K applied (shell HE/WP/SMK) ...

..................................................................................................................................... 2-24 Figure 2-12. Example of a low angle safety matrix (shell M825) ...................................................... 2-25 Figure 2-13. Example of ballistic data (M825) (NOTE: Refer to 155-AM-3 for MACS procedures) 2-26 Figure 2-14. Example of post occupation low angle safety with Range K applied (shell M825) ...... 2-29 Figure 2-15. Example of a low angle safety matrix (shell illumination) ............................................. 2-30 Figure 2-16. Example of safety table data, M485 illumination (NOTE: Refer to 155-AM-3 for MACS

procedures) .................................................................................................................... 2-31

Contents

15 November 2013 TC 3-09.8 v

Figure 2-17. High angle safety matrix .............................................................................................. 2-38 Figure 2-18. Example of a high angle safety matrix (shell HE) ........................................................ 2-39 Figure 2-19. Example of a high angle safety matrix (shell M825) .................................................... 2-40 Figure 2-20. Example of a high angle safety matrix (shell illumination) .......................................... 2-41 Figure 2-21. Low angle safety computations .................................................................................... 2-42 Figure 2-22. High angle safety computations .................................................................................. 2-43 Figure 2-23. Angles of minimum QE ................................................................................................. 2-45 Figure 2-24. Armed VT decision tree ................................................................................................ 2-47 Figure 2-25. Example impact area .................................................................................................... 2-58 Figure 2-26. Example OPAREA azimuth limits OPAREA Method 1 ................................................ 2-58 Figure 2-27. Example development of target selection box azimuth limits ....................................... 2-59 Figure 2-28. Example development of target selection box range limits .......................................... 2-60 Figure 2-29. Example development of minimum and maximum quadrant ....................................... 2-60 Figure 2-30. Safety T computations (fire missions) .......................................................................... 2-62 Figure 2-31. Example Safety T ......................................................................................................... 2-62 Figure 2-32. Firing OPAREA SDZ requirements .............................................................................. 2-63 Figure 2-33. Example exclusion areas M28A1/A2 ............................................................................ 2-64 Figure 2-34. Example impact area .................................................................................................... 2-66 Figure 2-35. Example OPAREA azimuth limits OPAREA Method 2 ................................................ 2-66 Figure 2-36. Example of minimum and maximum range arcs .......................................................... 2-67 Figure 2-37. Safety T computations (fire missions) .......................................................................... 2-68 Figure 2-38. Example Safety T ......................................................................................................... 2-68 Figure 2-39. Firing OPAREA SDZ requirements .............................................................................. 2-70 Figure 2-40. Example of exclusion areas for M28A1/A2 .................................................................. 2-71 Figure 2-41. Example of the development of target selection box azimuth limits ............................. 2-71 Figure 2-42. Example of the development of target selection box range limits ................................ 2-72 Figure 2-43. Example of an impact area ........................................................................................... 2-73 Figure 2-44. Example of the development of target selection box range limits ................................ 2-74 Figure 2-45. Example of computing safety data ............................................................................... 2-75 Figure 2-46. Example of a Safety T .................................................................................................. 2-76 Figure 2-47. Example of the LDA and the NHA ................................................................................ 2-77 Figure 2-48. Example exclusion areas M28A1/A2 ............................................................................ 2-78 Figure 2-49. Example of an impact area ........................................................................................... 2-79 Figure 2-50. Example of azimuth limits ............................................................................................. 2-80 Figure 2-51. Example of fire missions for Safety T ........................................................................... 2-80 Figure 2-52. Example of a Safety T .................................................................................................. 2-81 Figure 2-53. Example LDA, NHA, and Exclusion Areas I and II ....................................................... 2-82 Figure 3-1. Test station diagram ......................................................................................................... 3-3 Figure 4-1. Example 1 Cluster method testing station .................................................................... 4-4 Figure 4-2. Example 2 Cluster method testing station .................................................................... 4-4 Figure 4-3. Test stations “round-robin” guideline .............................................................................. 4-65 Figure 5-1. Test station diagram ......................................................................................................... 5-3

Contents

vi TC 3-09.8 15 November 2013

Figure 6-1. 13D/P test station diagram ............................................................................................... 6-3 Figure 7-1. Sample test station diagram ............................................................................................. 7-3 Figure B-1. PCR range table ............................................................................................................... B-1 Figure D-1. Five elements of accurate predicted fire are met ........................................................... D-30 Figure D-2. Accurate predicted fire requirements not met ................................................................ D-34

Tables Table 1-1. FA gunnery tables .............................................................................................................. 1-5 Table 1-1. FA gunnery tables (continued) ........................................................................................... 1-5 Table 1-2. Section/Team qualification criteria ..................................................................................... 1-7 Table 2-1. Manual safety computation .............................................................................................. 2-12 Table 2-2. Construction of a basic safety diagram ........................................................................... 2-14 Table 2-3. Low angle procedures ..................................................................................................... 2-16 Table 2-3. Low angle procedures (continued) .................................................................................. 2-17 Table 2-4. Tables and addenda required for safety computations ................................................... 2-20 Table 2-5. Low angle procedures using a GFT with GFT setting applied ........................................ 2-21 Table 2-5. Low angle procedures using a GFT with GFT setting applied (continued) ..................... 2-22 Table 2-5. Low angle procedures using a GFT with GFT setting applied (continued) ..................... 2-23 Table 2-6. Examples of low angle safety .......................................................................................... 2-23 Table 2-7. Ballistic Data for Safety Computations ............................................................................ 2-27 Table 2-8. Ballistic Data for Safety Computations ............................................................................ 2-32 Table 2-9. Procedures to determine maximum effective illumination area ....................................... 2-34 Table 2-10. High angle safety procedures ....................................................................................... 2-36 Table 2-10. High angle safety procedures (continued) ..................................................................... 2-37 Table 2-11. Examples of high angle safety ...................................................................................... 2-39 Table 2-12. Manual minimum QE computations ............................................................................... 2-46 Table 2-13. RFT minimum QE computations .................................................................................... 2-46 Table 2-14. RFT example for howitzer platoon ................................................................................. 2-46 Table 2-15. Manual armed VT minimum QE computations .............................................................. 2-48 Table 2-16. RFT minimum QE computations .................................................................................... 2-48 Table 2-17. Intervening crest, option 1 ............................................................................................. 2-50 Table 2-18. Intervening crest, option 2 ............................................................................................. 2-51 Table 2-19. M28A1/A2 (combined) safety ........................................................................................ 2-55 Table 2-20. Exclusion areas.............................................................................................................. 2-63 Table 2-21. Launcher checklist ......................................................................................................... 2-85 Table 2-21. launcher checklist (continued) ....................................................................................... 2-86 Table 2-22. OIC/FDC checklist ......................................................................................................... 2-86 Table 2-22. OIC/FDC checklist (continued) ...................................................................................... 2-87 Table 2-23. Launcher checklist ......................................................................................................... 2-88 Table 2-24. OIC/FDC Launcher checklist ......................................................................................... 2-89

Contents

15 November 2013 TC 3-09.8 vii

Table 2-24. OIC/FDC Launcher checklist (continued) ...................................................................... 2-90 Table 3-1. Test Stations ...................................................................................................................... 3-5 Table 3-2. Fire Support Table I – Basic FS skills (individual) ........................................................... 3-17 Table 3-2. Fire Support Table I – Basic FS skills (individual)(continued) ......................................... 3-18 Table 3-3. JFO academic sustainment ............................................................................................. 3-56 Table 3-4. Fire Support Table II – Establish operations ................................................................... 3-57 Table 3-5. Fire Support Table III – Fire planning .............................................................................. 3-64 Table 3-6. Fire Support Table IV – Execute fires .............................................................................. 3-89 Table 4-1. Gunner’s qualification test ............................................................................................... 4-17 Table 4-2. Howitzer Table I: Individual tasks .................................................................................... 4-28 Table 4-3. Howitzer Table II: Collective tasks for rigging .................................................................. 4-41 Table 4-4. Rigging procedures .......................................................................................................... 4-41 Table 4-5. Howitzer Table III – Establish operations ........................................................................ 4-48 Table 4-6. Howitzer Table IV – Execute fires .................................................................................... 4-57 Table 4-7. Howitzer Table V – Section certification .......................................................................... 4-62 Table 4-8. Howitzer Table VI – Section qualification ........................................................................ 4-62 Table 4-9. MLRS section tables ........................................................................................................ 4-75 Table 4-10. MLRS Table I – Basic skills (individual) ......................................................................... 4-75 Table 4-11. MLRS Table II – Conduct MLRS firing section OPAREA occupation ........................... 4-84 Table 4-12. MLRS Table III – Prepare HIMARS for air movement ................................................... 4-86 Table 4-13. MLRS Table IV/A – Launcher reload procedures .......................................................... 4-87 Table 4-14. MLRS Table IV/B – Ammunition upload/download procedures .................................... 4-89 Table 4-15. MLRS Table V – Training and certification .................................................................... 4-92 Table 4-16. Dry-fire certification fire mission and ammunition requirements .................................... 4-93 Table 4-17. MLRS Table VI – Qualification ....................................................................................... 4-94 Table 5-1. Radar Table IA – Individual tasks .................................................................................... 5-12 Table 5-2. Radar Table IB – Individual leader tasks ......................................................................... 5-18 Table 5-3. Radar Table II – LCMR .................................................................................................... 5-20 Table 5-4. Radar Table III – RSOP ................................................................................................... 5-22 Table 5-5. Radar Table IV – Radar operations ................................................................................. 5-26 Table 6-1. Test Stations ...................................................................................................................... 6-4 Table 6-2. Fire Direction Operator's Test ............................................................................................ 6-7 Table 6-3. Fire Direction Table I – Individual tasks 13D and 13P..................................................... 6-12 Table 6-4. Task Reference ................................................................................................................ 6-16 Table 6-5. Fire Direction Table II – Establish operations .................................................................. 6-17 Table 6-6. Fire Direction Table III – Compute firing data .................................................................. 6-23 Table 6-7. Fire Direction Table IV – Provide Control of the FDC...................................................... 6-31 Table 7-4. Survey/MET Table I – Individual survey/MET skills ......................................................... 7-13 Table 7-5. Survey/MET Table II – Establish operations ................................................................... 7-28 Table 7-6. Survey/MET Table III – Survey/MET planning and coordination ..................................... 7-31 Table 7-7. Survey/MET Table IV – Perform survey/MET missions .................................................. 7-32 Table 8-1. Collective Gunnery Tables VII–XII ..................................................................................... 8-2

Contents

viii TC 3-09.8 15 November 2013

Table 8-2. Tasks for Collective Gunnery Tables XIII–XVIII .............................................................. 8-23 Table B-1. Rapid Fire Table I ............................................................................................................ B-1 Table B-1. Rapid Fire Table I(continued) ......................................................................................... B-2 Table B-1. Rapid Fire Table I(continued) ......................................................................................... B-3 Table B-1. Rapid Fire Table I(continued) ......................................................................................... B-4 Table B-1. Rapid Fire Table I(continued) ......................................................................................... B-5 Table B-1. Rapid Fire Table I(continued) ......................................................................................... B-6 Table B-2. Rapid Fire Table II ............................................................................................................ B-7 Table B-2. Rapid Fire Table II(continued) ........................................................................................... B-8 Table B-2. Rapid Fire Table II(continued) ........................................................................................... B-9 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-10 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-11 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-12 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-13 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-14 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-15 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-16 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-17 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-18 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-19 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-20 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-21 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-22 Table B-2. Rapid Fire Table II(continued) ......................................................................................... B-23 Table D-1. Overall fire mission timing ................................................................................................ D-6 Table D-2. Simultaneous mission timing ............................................................................................ D-7 Table D-3. Fire mission section timing (FIST/COLT) ......................................................................... D-7 Table D-4. Fire mission section timing (FDC section) ....................................................................... D-8 Table D-5. Fire mission section timing (gun section) ......................................................................... D-8 Table D-6. Ready to fire (RTF) times – general ................................................................................. D-9 Table D-6.1. RTF times – emergency mission (hip shoot) .............................................................. D-10 Table D-7. Fire for effect (FFE): When ready, at my command, or time on target .......................... D-12 Table D-8. FFE: Large segmented target ........................................................................................ D-13 Table D-9. FFE: FASCAM (target of opportunity) ............................................................................ D-14 Table D-10. FFE: Priority target or final protective fire .................................................................... D-15 Table D-11. FFE: Immediate suppression ....................................................................................... D-16 Table D-12. FFE: Immediate smoke ................................................................................................ D-17 Table D-13. FFE: ICM/DPICM ......................................................................................................... D-18 Table D-14. FFE: Schedule of fires/fire plan .................................................................................... D-19 Table D-15. FFE: Counterfire ........................................................................................................... D-20 Table D-16. FFE: Engage a moving target, AMC, or TOT ............................................................... D-21 Table D-17. Conduct registration, with radar ................................................................................... D-22

Contents

15 November 2013 TC 3-09.8 ix

Table D-18. Conduct HB/MPI registration (with at least two observers) ......................................... D-23 Table D-19. Adjust fire, forward observer ........................................................................................ D-24 Table D-20. Adjust fire, forward observer using a LLDR/MELIOS, or adjust fire, radar observed .. D-25 Table D-21. Adjust fire, high angle , forward observer .................................................................... D-26 Table D-22. Adjust fire, high angle , forward observer using a G/VLLD/LLDR/MELIOS; adjust fire, high

angle , radar observed ............................................................................................................. D-27 Table D-23. Adjust fire: Coordinated illumination ............................................................................ D-28 Table D-24. Adjust fire: Simultaneous missions .............................................................................. D-29 Table D-25. Adjust illumination ........................................................................................................ D-30 Table D-26. Adjust smoke ................................................................................................................ D-31 Table D-27. X and Y radius values .................................................................................................. D-35

x TC 3-09.8 15 November 2013

Preface The mission of the Field Artillery is to deliver fires and integrate those fires and scalable capabilities to enable commanders to dominate their operational environment across full spectrum operations. To accomplish the mission, the Field Artillery must remain the maneuver commander’s premier, worldwide deployable force able to dominate any operating environment through the integration, synchronization, and employment of organic, joint, and coalition lethal and non-lethal fires.

Training Circular (TC) 3-09.8 is an interim training circular intended to support the mission of the Field Artillery by providing the operational Army Field Artillery Individual Section Certification Tables. These tables are intended to parallel Maneuver Tables 1–6 and are designed for artillery leaders at all levels to assess the proficiency of their units to perform their mission and to sustain Field Artillery Core Competencies throughout the ARFORGEN Cycle. The programs outlined in this manual follow the concepts and guidance provided in ADP 7-0 and ADRP 7-0, Training Units and Developing Leaders.

The tasks, conditions, and standards in this TC are based on system technical manuals, training products, and tasks in the military occupational specialty (MOS) 13-series Soldier’s manuals. In all cases, use the most current technical manuals as references when executing the tables. All Field Artillery units are encouraged to provide ideas to upgrade the tasks, conditions, and standards in this circular.

This publication applies to the Active Army, the Army National Guard (ARNG), Army National guard of the United States (ARNGUS) and the U.S. Army Reserve (USAR) unless otherwise stated.

The proponent for this publication is the United Stated Army Training and Doctrine Command. The preparing agency is the U.S Army Field Artillery School. Submit changes for improving this publication on DA Form 2028 (Recommend Changes to Publications and Blank Forms) and forward to the Directorate of Training and Doctrine, Doctrine Branch, Fires Center of Excellence, Fort Sill, Oklahoma 73503.

15 November 2013 TC 3-09.8 1-1

Chapter 1

Introduction This Training Circular (TC) provides the guidelines for implementing a Field Artillery (FA) gunnery program that incorporates all FA systems. The objective is a safe, technically and doctrinally grounded, progressive, task oriented training model. FA, as a system of systems, requires integrating functions or tasks performed by the critical elements of the gunnery team to provide timely and accurate fires. The artillery tables provide the commander with a systematic means of training and qualifying each of the sections/crews/teams that are critical to the solution of the gunnery problem. The tables provide progressive training from Military Occupational Specialty (MOS) qualified individual tasks through collective gunnery training at the battalion level. These tables also provide all FA leaders and Soldiers with the “what” and “how” to train materials that are standard across the Army.

The FA commander continuously assesses the unit’s proficiency and readiness to perform mission essential tasks. Each commander implements gunnery programs to achieve and sustain unit readiness and proficiency in these tasks. The commander uses all the resources available to implement an efficient gunnery program; this maximizes the use of ammunition, training area availability, and Soldier training time to sustain proficiency.

This TC provides an effective progressive method for qualification procedures. Given the tempo and various mission requirements, the intent of this TC is to provide commanders a flexible, yet proven methodology to train and develop highly qualified combat crews/sections.Para1-1

QUALIFICATION METHODOLOGY

CERTIFICATION 1-1. Certification is a safety focused assessment by the battery commander that his crews are safe to fire. It is normally done semi-annually, but can be increased in frequency as necessary in order to meet Unit Status Report (USR) qualification requirements. It is completed at battery level, valid for 6 months, and includes the written safety test administered by the Battalion Master Gunner/Fire Direction Non Commissioned Officer (FDNCO)/Fire Support NCO, a hands-on safety certification witnessed by the Battery Commander, and the Artillery Skills Proficiency Test (ASPT) which has been verified and validated by the Battalion’s Master Gunner. Table V (Dry Missions) administered by the battery are used to validate the commander’s recommendation of safety certification. Certification must be completed prior to any live fire qualification or requalification procedures.

EVALUATION 1-2. Evaluation is a semi-annual external validation of sections/teams. It is focused on Artillery Table VI missions. The evaluation is administered under the control of the Battalion Master Gunner and the oversight by the Battalion’s Command Sergeant Major.

QUALIFICATION 1-3. Qualification is a live fire event based on the correct execution of Artillery Table VI. It is normally done semi-annually for the Active Component (AC) and annually for the Army National Guard (ARNG), but can be increased in frequency as necessary in order to meet USR qualification requirements. It is completed at battery level and observed by battery leadership. Qualification is valid for 6 months from date of qualification for the AC and 12 months for the ARNG.

Chapter 1

1-2 TC 3-09.8 15 November 2013

1-4. No training strategy satisfies the requirements of all units, and this model is no exception. A new organization with untrained personnel would use the progression of tables as presented as a means to achieve training proficiency. As the proficiency of the unit progresses and is sustained, the commander adjusts the strategy to fit the level of training of the unit. The semi-annual lock step progression of Tables I–VI is not the requirement; demonstrated training proficiency is the goal. The commander should consider the following to determine the gunnery strategy: (1) Results of the ASPT, (2) Record of proficiency on individual tasks (Table I initially, but task proficiency is expected to be sustained and improved during normal training), and (3) Section Task Proficiency on critical tasks (Table V).

1-5. The unit Master Gunner is a primary advisor and manager of the commander’s gunnery program. FA Master Gunners are the commander’s key resource and the unit focal point for administering the training and qualification programs in this TC. Master Gunners are selected for their technical education and skills in their MOS, training management, and individual instructor proficiency, as well as for breadth of proficiency in various artillery skills. A Master Gunner is an operations staff asset, having specified training management responsibilities for gunnery, technical standardization, and safety oversight. The Master Gunner is responsible for the selection, training, and certification of evaluators for implementing the tables in this TC. He will assist in the execution of the commander’s safety certification program. The Master Gunner will also assist the commander in developing programs and training future Master Gunners in the organization. For a more detailed description of all Master Gunner duties and responsibilities see FM 3-09.21 (Tactics, Techniques and Procedures for the Field Artillery Battalion).

SCOPE 1-6. This TC provides a methodology for standardizing gunnery training for the FA force to support Unified Land Operations. Effective FA training throughout the years has always required tough, thorough, and achievable standards. Technical proficiency and flexibility in a resource and time constrained environment is the hallmark of the FA branch.

GENERAL CONTENT 1-7. The general content of the FA Gunnery Tables provides:

• Tables with procedures and individual tasks based on the associated system technical manuals (TMs) for the equipment assigned to the section being trained. References are provided for all tasks in the tables.

• Focus on FA gunnery procedures, in the provision of an Armywide FA standard gunnery training program, in a common tabular format consistent with maneuver branch tables.

• Procedures for certification/qualification of all crews/sections involved in gunnery. The tables provide crew/section/team qualification tables through collective training at the battalion level as required to support the commander’s assessment of training readiness, in accordance with AR 220- 1 (Unit Status Reporting).

• Performance steps for all individual task are available through the Digital Training Managmenet System (DTMS) or each Military Occupational Speciality (MOS) Soldier Training Publication (STP). Performance measures are available to use during the evaluaiton of all individual and collective tasks.

STANDARDIZATION 1-8. Standardization serves as a guideline to unit commanders and Soldiers for application in their training environment. Using these practices depends on the planning and expertise of Soldier leaders in their environment. This TC is a source to sustain the technical body of knowledge in a force performing a multitude of Soldier tasks related and unrelated to gunnery proficiency. Standardization:

• Provides prescriptive guidelines and rationale for standardized gunnery in U.S. Army FA units. • Accommodates command, table of organization and equipment (TOE), and unit peculiar

requirements (such as theater of operations, mission essential task list [METL], airborne, and air assault) while capturing artillery standards at the same time.

Introduction

15 November 2013 TC 3-09.8 1-3

• Provides baseline proficiency requirements for unit(s) retraining from non-artillery employments. • Allows commanders to incorporate training conditions, exercises, and focus.

SINGLE SOURCES 1-9. Though a single source document, this TC is not an encyclopedic, multivolume recapitulation of TMs. This TC is designed to be used with the up to date TMs required for the safe and effective operation of all FA systems. Single source:

• Provides actual information or bibliographical references to artillery documentation for training FA tables to standard.

• Provides a living document to the field Army by reference to the requirements for updated TMs as they are developed for current and new systems.

TASK BASED TRAINING STRATEGY 1-10. The artillery tables represent a task based training strategy linked to required resources to assist the commander and training manager in the development of realistic, battle focused gunnery training. The artillery training and standards in this TC are, by design, related to other available descriptive collective training strategies available to unit leaders. These strategies include the following:

• The Combined Arms Training Strategies (CATS) for artillery battalions include a strategy, the supporting resources and recommended events, training aids, devices, simulators, and simulations (TADSS), and supporting training support packages (TSPs) for the training of the artillery tables. The CATS ammunition resources are based on the Standards in Training Commission (STRAC) allocations.

• DA Pam 350-38 (Standards in Training Commission [STRAC]) provides descriptive strategies, combining ammunition allocations, and TADSS based on the overarching CATS.

BATTLE FOCUS 1-11. Battle focus is a concept for deriving peacetime training requirements from wartime missions. Battle focus guides the planning, execution, and assessment of each unit’s training program. This is to ensure that its members train as they fight. The battle focus process is the same for Active Army and Reserve Component (RC) units (both Modified Table of Organization and Equipment [MTOE] and Table of Distribution and Allowances [TDA]). ADP 7-0, Training Units and Developing Leaders explains how to plan, resource, and execute training events. This TC provides the gunnery principles and standards to evaluate crew, section, and platoon training.

MISSION ESSENTIAL TASK LIST 1-12. A unit’s training program must support the METL; therefore, time, resources, and command emphasis must all focus on training tasks that support the METL. Platoon sergeants and section chiefs should use the appropriate critical task list to identify the individual tasks that support the collective tasks. To develop the METL, the commander must know and understand the war plans and external directives handed down from the higher headquarters.

• The Brigade Combat Team (BCT) Commander and Fires Battalion Commander will determine the fire missions that must be trained by the Fire Support Team/Combat Observation and Lasing Team (FIST/COLT) to support the unit’s METL.

COMMANDERS ASSESSMENT 1-13. FA Gunnery training must be well designed and continuous for units to achieve, improve, and sustain gunnery proficiency. Each commander must continually assess their unit’s previous performance, current level of training, and state of weapon and weapon platform maintenance to determine its level of proficiency in gunnery. Then, they must train their unit to produce skilled crewmen, crews, and platoons. The Master Gunner should advise the commander and assess, plan, develop, implement, instruct, evaluate, and reassess all phases of

Chapter 1

1-4 TC 3-09.8 15 November 2013

gunnery training. The commander’s ongoing assessment is crucial to gunnery program development and where the team effort should be demonstrated most.

1-14. The following factors must be considered during the assessment: • Evaluate previous training. The commander assesses training with input from the executive officer

(XO), S-3, subordinate leaders, and Master Gunners (see ADP 7-0). He can use individual and crew training to determine the unit’s proficiency.  Individual. Common task test results show basic individual training proficiency. The ASPT

evaluates specific section related individual proficiency. The written test for Table I evaluates knowledge of Individual MOS tasks. Individual weapons training and qualification scores indicate proficiency levels with the various weapons organic to the sections and platoon.

 Section. Section training proficiency can be measured by reviewing results of most recent gunnery tables, leader safety certification results, and specific section training requirements.

 Collective. Collective training proficiency can be measured by reviewing past collective gunnery, Combat Training Center (CTC), and field training exercise (FTX) results.