List three objective of analysis and evaluation of electrical and electronic faults in dynamic control management system from workplace instructions

There are the three objectives of evaluation and analysis of electronics fault in the dynamic control of the management system

To determine the measure of rectification fault that affect variation characteristics of systems along with parameters and improved the performance of the system. The braking system is also its objective that includes the direct fault of the input sensor, output actuator, computer system and the specification of the component along with system modification.

List various source of specifications with examples that one can use when analyzing and evaluating faults in dynamic control management systems.

            After the analyzing and evaluating faults in dynamic control management systems there are the various sources like light vehicle braking systems, monitoring process with testing equipment as well as the technical information for the work environment. For example, two-wheel, as well as four-wheel drive vehicles, are included in the light vehicles. Leading, duo-servo, twin leading, cast iron as well as aluminum brakes drum are the specification that includes in Drum brakes. Foot, hand, Banksia type as well as electric are the specification that includes in Park brakes.

What is a system fault in relation to dynamic control management system? Explain in brief and give three examples of symptoms associated with this system fault.

        The system faults in relation to dynamic control management system are of two different vehicles or machinery. If the fault occurs in the Braking system with this system fault that is connected to dynamic management control systems. Such as ABS (Anti-lock braking system), integrated control system and Anti-lock braking system,a module of electronic braking system as well as control system stability and traction.

How will you identify the hazards associated with the identified work? Explain how workplace procedure be used to manage risks?

        By the work, health and safety along with the occupational health in safety identify the hazardous that connected with the identified work to evaluate the faults in dynamic control of management system involving the procedure for the hazardous and controlling the risk that is connected by wearing the jewelry while working with high current wiring systems.

List five evaluation criteria to assess faulty dynamic control management systems.

        There are five evaluation criteria to assess the faulty dynamic control management systems. They must be related to the workplace operation as well as satisfy the requirements of the evaluation criteria. The criteria are expressed in the below

For diagnosing the fault select appropriate methods as well as techniques

In a systematic manner complete the preliminary activity.

Within the vehicle, dynamic control systems diagnose as well as repair three different faults

According to the workplace, conduct diagnose as well as repair the procedure

With workplace requirements that compiles the present vehicle in a condition.

Write down the various steps that you will follow in analyzing and evaluating faults with the dynamic control management systems of the light vehicles

            In the dynamic control of the management systems, there is the following step that involved in the evaluating faults of the light vehicles

The first steps is that confirm the accuracy as well as the consistency of the performances that are together by the application of the required skills

Use the direct observations of the tasks along with involving the questioning of the required skills

Competence must be required in the conjunctions

List three testing equipment’s and their function that can use to check the faults within the dynamic control management systems

Digital multimeter

Lab Oscilloscope

Data Scanners

Test LED’s

All these equipment involve the plus generator along with the component/manufactures that is a supplier to the testing equipment. In addition, the test is concluded including the integrity along with the wiring plus connector as well as the output and input specifications.

List and explain the function of at least five tools used during the diagnostic procedure of faulty dynamic control management system?

            During the diagnostic procedure of faulty dynamic control management system following tools are used and listed below. The function of the tools is that electronic testing tools are used for checking the current, voltage and observe the wave. And the other tools are used for lifting the device and for removing that device tools are used.

Power tool

Hand tool

Lifting devices

Dynamometer

Testing equipment for electronic is including:

Oscilloscope

Scan tools

Multimeter

List Five dynamic control management component and their possible relevant faults and presents an analysis of the same.

For the dynamic control management, there are following components

Actuator & sensors along with the control monitoring systems

Control Signal Circuits

ABS

Stability Control Systems

Traction Control Systems

By using the Anti-lock braking (ABS) faults in this systems has performed the analysis along with the stability and traction of the control systems

Explain difference steps of the analytical and evaluative methodology used to locate the fault.

To locate the fault analytical as well as the evaluative methodology used the following step such as;

Diagnostic process

Sequence

Test as well as testing equipment

The diagnostic process is used to diagnose the fault in the dynamic control management system.

What will be the negative outcomes if the tests are not carried out according to workplace procedure and safety requirements?

            If the test is not carried out according to the workplace and the outcomes will be negative, it affects the procedure, as well as safety requirement, are disturbed. As for the positive result, the WHS long with OHS include the procedure for operating safely battery charging equipment as well as battery testing equipment. But in negative outcomes, this will not operate safely. To store, trap, as well as dispose of corrosive as well as toxic substances follow the SDS.

How will you verify the findings related to dynamic control management system fault and ensure that it aligns with the manufactures specifications?

        There are the followings findings that are related to the faults of the dynamic control management system by using the visuals as well as a functional assessment on the behalf damage, wear along with the electrical open and short circuits. The diagnostic, as well as analytical findings, are verified needed through the reliable alternative options of the process.

Give three examples of dynamic control management faults and recommended a fix for each fault.

        We provide the three examples of fault in dynamic control management system; the first example is a fault in electrical or electronic braking systems. In the input sensor, output actuators, computer system and many more these are the direct faults which become the reason of the failure of the system. The solution for this fault which is recommended is that circuit breaker should be present there so if any fault comes than automatically it turns off the device and protects the whole system. The other example of a braking system in any vehicle is ABS, engine brakes, retarders electric, as well as multi-class bus systems by wire brake. The other example is an indirect fault in the dynamic control management system.

What is the use of the diagnostic report? Explain with examples.

        The diagnostic report is a set of information that is typically provided through the services of diagnostics when the investigations are complete. This information is involved text report, code as well as images. The examples of the diagnostic report the diagnostics procedures for the dynamics of the vehicle of control systems.

Explain in brief the process of final inspection after the dynamic Control management system has been fixed.

        After the dynamic control management system has been fixed, then the final inspection is made to ensure that the work is done according to the requirement of the workplace. After that checked that worked area is cleaned, and water material is disposed of as well as collected the recycled material. According to the workplace procedures tools as well as equipment are checked as well as stored. Then according to the workplace procedure workplace documentation is processed.

What safety and environmental requirement will you follow to minimize the impact on the environment from a workshop?

        From a workshop to minimize the impact on the environment personal protective equipment used the appropriate safety requirements. High voltage ignition system working on vehicle. These are the facts which minimize the effect of environment.

How can you ensure that the tools and equipment are checked and stored after every repair job?

        The tools, as well as equipment, checked the repair jobs like the procedures is removing them, replacing along with the adjusting the faults which are used the functional assessments for the corrosion, electrical open and shorts. The effectiveness of the repair actions is validated along with it confirming the fault of the reported that has been rectified.

Why is it important to replace the workplace documentation for every repair?

        It is important because it follows the workplace documentation like the code of practices as well as the operating procedures. In addition, the workplace documentation that is processed regarding the workplace procedure. While reporting the finding of the failure analysis along with the complete reports of the documents, the accurately fill out the documentation.

Details the vehicle and its faults to analyze and evaluate an electrical or electronic fault in dynamic control management systems of two different light vehicles. The vehicles must involve two of the following systems:

        In the assessment two tasks to analyze and evaluate an electrical or electronic fault in the dynamic control management system of two different light vehicle steering and suspension system is used. The first fault  in the design and planning of the light vehicle steering and suspension system is the hydraulic faults, mechanical faults, as well as electrical fault. Other faults are that which occur in the system such as: system failure Analysis along with failure analysis of component.

        The other is analyzed and evaluates electrical and electronic faults in dynamic control management systems. The system must include the ABS, as well as ABS and integrated traction control system. for faults in dynamic control management systems design and planning of diagnostic procedure such as electrical faults and electric faults. Some faults are according to the system; ABS, bus network, SCS as well as TCS.

Assessments task 3 Dynamic Control

        By Considering WHS as well as OHS, procedures diagnose as well as rectify that faults which is identified in the Assessments Task 2.  The requirements of the WHS relating with the analyzing are of faults in a dynamic control of the managements systems, which is involving in the procedures of the controlling and the identifying the hazards. When Considering the OHS it is connected with the jewelry while working in the high current of the wiring systems. By considering the diagnostic tool like the diagnostics troubles code as well as the condition is running for the diagnostic tools for the analysis of the faults in assessment 2.