Best proposal letter for hydrostatic

Introduction of Hydrostatics

            In this proposal letter the purpose is to determine the hydrostatic thrust as well as the distance to the center of the pressure for fully submerged face and partially. To calculate the resultant hydrostatic force we use the apparatus of the hydrostatic pressure. In addition, this apparatus level supposed the system of the equilibrium with all the vertical forces opposite and equal. That is why when we apply the principle of the equilibrium and momentum the devices is related with the hydraulic. In addition, this device is able for testing and demonstrates to achieve the experimental results.  The present work will measure the hydrostatic pressure of the fluids and have applications in dam construction, sanitation, and hydrology. The hydrostatic thrust acts on the surface of water and submerge. The determination of line of action records the mass and the depth in the process.

Qualification of Hydrostatics

            I am doing a civil engineering from University of Nebraska. I already do internship in the ABC University where I am practiced in measuring the hydrostatic properties of the fluids devices. Therefore, my skills for preparing such devices that works based on hydrostatic properties of fluids are very much improved and one year experience and my excellent projects are clearly explain my skills and better understanding of my studies. I have a great expertise on different software, like MATLAB, Mutism, and Latex. I also work for ABC lab as an internee and get more and more practice.

Background of Hydrostatics

            The difference in the pressure due to change in mass of water can be used to determine conditions for the device submerged in the water. Through balancing the Apparatus of the hydrostatic pressure, the line and thrust were determined by the set of water and weight. The hydrostatic pressure along with force counteracting the moments both created force. For this letter to developed the hydrostatic forces as well as physical understanding. After the analysis of hydrostatic experiment there is little problem, that is regarding to the human error, means (not reading the measurements accurately). Because the distance to the center of the pressure in theoretical solution is higher than the experimental result.

Work schedule of Hydrostatics

            According to requirements of the experiment, this proposal is completed in approximately 3-4 months.  Because for this proposal, in lab experiment we prepare the devices and devices should be prepared in 3approximately.  We demonstrates the experimental results where the devices is able to test the moments and equilibrium principles. Then after this in one week, we perform this hydrostatics experiments and obtained all the requirements regarding to experiment.  Moreover, in 2nd week prepare the proposal letter according to the lab experiments.

Proposal statement of Hydrostatics

            The present work will enable to develop understanding of hydrostatic forces and the action of force on the planner surface. The experimental results will provide systems and structures for the partially and fully submerged. In addition, for these systems, we prepare the device that is able to test the principle of equilibrium and moments. This device is prepared due to two basic reasons; determine the hydrostatic thrust and distance to center of pressure for a partially and fully submerged vertical face. Partially submerged device had a range of 0.144 - 0.164 meter. For the fully submerged device had a range of 0.148 - 0.153 meters.

Costs of Hydrostatics

            The Approximately Cost of the hydrostatics test including the partially submerged devices and the fully submerged is between $350-$400.For this experiment first of all prepare this device that cost is $200-$250. In addition, the material cost including paper, software license and system, and the printing expense for proposal is approximately $100. At last, the labor cost is $50.

Results of Hydrostatics

            The use of additional water generates the hydrostatic thrust and devices can be generated for partially and fully submerged. The process used hydrostatic apparatus, graduated cylinder, and hydrostatic bench. The increase in the water in weighted submerged plan measure the pressure. The experimental and theoretical results are similar that shows minimum difference between two analyses for fully and partially submerged analysis. In this section, compare the position of the line of action of thrust from theoretical to experimental. The theoretically values for partially submerged were. For partial submersion, our experimental values were 0.155 m, 0.144 m, 0.164 m, 0.158, and 0.155 m. For partial submersion, experimental values were lower than our theoretical values. This could be caused by human error or by change in weights added.

            After all the above discussion, proper budgeting must be completed because when the project going to start foe preparing such devices,it would not have to face any issue related to material and any other permission because payments must be clear and preparation of devices should be started on time. Devices must be accurately prepare that fulfill the requirement.

Conclusion of Hydrostatics

                In this proposal letter, the experimental shows in what way the force of hydrostatic is increased when the depth of the water continuing to get the larger. Moreover, after the analysis the results shows that, our theoretical were good estimations as to our expectations. The distance to center of the pressure given the theoretical results for the partially submerged, that is higher than the experimental. The objective of the experiment is achieved. No doubt that we are preparing the best devices that you want and in such a reasonable prices. My expertise are always ready to preparing such devices and market demand of such devices are very high.