Lab Report on Gas Absorption

Part 5A1: Rotameter Verification of Lab Report on Gas Absorption

For flow measurement instrument the variable-area type flowmeter, or else Rotameter is the most reliable as well as economical. To withstand high pressure, corrosive fluids, as well as high temperatures in various configuration flow meter could be designed. To measure any gas or liquid rotameter can be calibrated. Tube and float are the part of rotameter. Rotameter is also known as flow meter there is no difference between them. During calibration, on the accuracy of the temperature, pressure, as well as flow rate rotameter accuracy, is dependent. The requirement of the meter performance will not satisfy by rotameter in some application during the tolerance of the manufacture state. Moreover, to fulfill the traceable requirement calibration is required in another form. Under consideration, the requirement of application Rotameter method is the most reliable method.

Procedure of Lab Report on Gas Absorption

In this lab experiment, Rotameter verification used to measure the CO₂ content inside the air stream. For eight different combination of the gas flow rate at the top of the column. The flow rate of each gas calculated as well as also record the expected reading along with the final text. From the air, ratios determine the mole fraction of the different gases. Rotameter verification by using a parity plot calculate if the rate of CO₂ to atmosphere meets with the expectation.