Introduction of Wind Power of the electronics products

Now a day's energy consumption rate is increasing in the society because of the excessive use of the electronics products. There are many methods available to our society to generate the energy in order to meet the need of energy for daily use.  Wind power plants are one of these ways that produce energy and supply clean renewable energy to the society. Cost effectiveness is the major benefit for the wind power plants. Wind power is a cost-effective way to generate renewable energy for the daily use of a human being. In our modern world, the population is going to be increased with the use of fossil fuels and oils to get energy. In such a situation, Wind power plants provide clean and renewable energy for their users.

Wind Power of the electronics products

Only in the American state, there are more than 72 wind generators working on continues basis to generate the environment-friendly energy for their citizens. The scientist of the china is working on the development of the wind turbines. China is establishing its plants in the other countries that can provide and manufacture turbine on the cheaper rate than China. According to the journal article presented by the (Lewis, 2007), China and India are leading the world in the production and installment of Wind power plants for the generation of renewable and clean energy.

According to an analysis in a research energy produced by the wind power generators is full filling the need of the population but it cannot be considered as the major or biggest source of energy generation. Wind power only cover the 0.5 percent of the overall energy generated for the global use. Electricity demand for the consumption is increasing in the western world more rapidly as compared to the eastern areas.

Because of this American Government, German Government, Netherland Government and government of Denmark are supporting the establishment of wind power plants because they are unable to produce energy at the cheap cost through other resources as the coil, fuels, gases and solar energy. All these resources have also the negative impact on the environment as excessive use of such sources increases the pollution in the environment (turbinegenerator.org, 2018).  

A number of companies from the china and other developed countries are establishing their plants in other geographical locations of the world where production of the turbine and generators at the cheap cost is possible. While China and Americans are also trying to acquire and consolidate the advanced companies that are working on the wind power plant. Thus they easily access the technologically advanced services

How wind Power works

Wind power plants have simple functions. Wind power plant use turbine that spin the generator and generate electricity. In a windmill, there is three or two propellers like blades that move around with the flow of air. Usually, wind power can be generated in the areas where air flow with the high speed and continuously. In the wind power plant rotors and main shaft also support the rotors blades to move in the direction and with the speed. There is an image attached in the appendices that present the functions of the wind power plant in the diagram form.

 Basically, wind power is based on the principals of the physics like the transfer of the kinetic energy from one object to the other because of change or motion. Therefore new research has designed blades and turbines that are highly efficient as blades can move more easily and generate power for the generators as compared to the other wings/ blades of the wind mill. While turbine design has also the nose that companies design in accordance with the aerodynamic design at the time of manufacturing. 

Current use of Wind Power of the electronics products

According to a research finding presented in the journal article, Spain is leading the world for the wind power plant. As their contribution to the wind power installation from 1997 to 2006 was Spain as more than other countries (Busby, 2012). Total megawatts generated by the wind power plants in the fixed duration of the time period was compared in the research studies and results present that only in Spain total megawatts reentered was more than 21,0000. While the maximum megawatts production was between the year of 2002 and early 2006s.  

In the global market of wind power Germany is leading the market with the shares of 30 in the overall wind power market. Then Denmark and Spain have the highest contribution of manufacturing in the global market shares. while when it comes to the installment of the wind power plants research findings elaborate that Denmark domestic companies have installed the wind power plants more than any other country of the world.

Advantages of Wind Power of the electronics products

The wind power energy generated method is considered the best method to produce energy as it has a number of benefits and advantages for the society. Some of the major advantages are listed below:

Wind energy is an environment-friendly energy.

Wind power generating resources as the power of air cannot end like other resources fuels and oils (turbinegenerator.org, 2018).

Through the use of wind power governments of the countries can control the natural resources of the country as coil and fuels use can be limited.

Wind power energy is clean and renewable

Wind power has the capability to stay sustained in the market.

Wind power generation plants work free of cost thus it can be considered the cheapest sources of energy generation (Lewis, 2007).

Wind power plants are now capable to work in the domestic locations also as in the past it was just limited to the wind farms.

Wind power plants have a very low cost for the maintenance and repairs as very rarely a wind turbine or any part of the wind turbine get damages.

It does not require expert technical support for daily operations as the function is really simple any one can deal with its control. 

Wind power plants generate the energy with the secured natural resources as there are no chances of chemical reaction or radiation in the environment.    

Disadvantages of Wind Power of the electronics products

Wind power plants are highly efficient plants for the energy generation and electricity production at the mass level. But still there are some disadvantages of the wind power that are mentioned below: 

Expensive installation of Wind Power of the electronics products

The wind power plants require installation costs also. According to the cost estimation installation cost for the wind power plant is more than the running and operational cost of the wind power plants.

The problem for the wildlife of Wind Power of the electronics products

The wind power plants are usually installed far away from the societies in the open area. The sharp working blades of the wind turbine are in this case dangerous for the wild animals, particularly for the birds. Wind power plants can toss them into pieces because of its sharp blades that are quite unacceptable.

Wind speed & Wind Power of the electronics products

Wind power generation plants require air blow with the adequate speed and continuous flow. High speed air like the storm also damage the wind power plants (turbinegenerator.org, 2018). In fact, air speed fluctuates that is not good for the power generation process.  While the suitable air condition is not available in all areas.

Noise pollution of Wind Power of the electronics products

Wind power plants are environment friendly because turbines do not cause add smoke or chemicals in the environment (turbinegenerator.org, 2018). But wind power plants add to noise pollution in the society (if placed near by the residential area it can be problematic) therefore wind power plants should be placed outside the town.

Future of Wind Power of the electronics products

In the light of the above discussion towards the advantages, disadvantages, and summaries of the article towards the future of the wind power we can conclude that wind power will have a better future in the coming years. Modern developed countries like china and Denmark are cautiously working on the wind turbines designs and structure, therefore, there is hope for the new innovation in the wind power plants.

Some features of the wind power plants are old now that developed countries are changing like the shapes of the turbine and blades (turbinegenerator.org, 2018). even the non-turbine harvesting technology is also introduced in the society that ensures that soon wind power will be used as one of the biggest renewable energy generation method.

Recommendation of Wind Power of the electronics products

Here are some recommendations for the better future of the wind power. Through following the recommendation wind power generation's process can be improved and the disadvantages can be reduced.  According to my recommendation wind power plants should have these changes:

The design of the wind turbine blades should be improved as there could be glass reinforced plastic used for the blades.

The blades of the wind power turbine should be designed in the aerolastic design for effective performance.

Plants should installed near the seaside’s to avoid the noise pollution.  

Conclusion of Wind Power of the electronics products

Wind power plants are discussed in the paper according to the findings of research. Wind power plants are generating energy for the people for their daily use of electricity. Wind power plants generate energy with the power of air as when air flows at the required speed blades of the turbine starts moving around the rotor. Thus the turbine forces the generator to generate electricity. According to the analysis of the paper, wind power is the cheapest sources of power generation if we exclude the cost of installment as wind power plants installation is really expensive. Wind power plants generate noise, therefore, plants should not be installed in the residential area.