Write 3-4 specific proprieties needed for the particular application for which the product is used.

There are the following properties used for the product;

·         Excellent resistance for most solvent

·         Alkaline , acid , dilute and alcohols

·         Moderate resistance to grease  

·         Relatively stiff material with useful temperature capabilities

·         High tensile strength

·         With good process ability low cost

·         Low temperature resistance is good

3. Based on you learning so far and further reading, identify 3-4 polymers/copolymers/polymer blends/polymer composites which might be suitable to make this product, along with justifying your choice.

There are the various examples;

Polymers

From propane and ethane and polypropane the formation of polythene is;

Polyethene is the polymer category.

Co-polymer:

There are creating through the addition of polymerization from the differed monomers;

Example: Buna-S; Buna-N

Polymer Composites

The polymerization of ethane is the suitable which are also create the polythene.

For examples: Carbon, glass, thermoplastic

4. Further elaborate the top 2 polymers on your list in terms of their structure, properties and other applications. You can also make a comparison table for this purpose.

The selected two polymers is Nylon and Teflon

Nylon

It is created through the condensation of polymerization of diamines by the carboxylic acid as well as amino acid;

Example: Nylon 6, 6

Structure: Nylon 6, 6

Application:

Nylon is used in making bristles for brushes, sheet and used in textile industry, tyre cord fabric  

Properties

·         Nylon is easy to wash

·         Resistance to heat

·         Very strong and elastic

Teflon
Structure

Application

·         Teflon is used in making gaskets

·         It is also used in non-stick surface coated textile synthesis

Properties

·         High electrical resistance

·         High dielectric strength

·         Resistance to water