Loading...

Messages

Proposals

Get Custom homework writing help and achieve A+ grades!

Custom writing help for your homework, Academic Paper and Assignments from Academic writers all over the world at Tutorsonspot round the clock.

Our promises:

  • Custom homework writing help
  • Plagiarism Free Solutions Guaranteed!
  • A+ Grade Guaranteed!
  • Privacy guaranteed!
  • Best prices guaranteed!
  • Timely delivery guaranteed!
  • Hundreds of Qualified Writers 24/7

Lab report on 1st and 2nd order of transient function

Objective of 1st and 2nd order of transient function            The objective of this lab is that to understand the step or damping response of the transient function. In this lab we design a circuit and construct as well as test a number of circuits with one or two energy storage elements. The goal of this experiment is to learn about transient response.Equipment of 1st and 2nd order of transient function            The thing …
View Full Paper
Category Engineering
Paper Type Report Writing
Reference Type N/A
Words 650

Abstract of Trans-Saharan Mega Project

                In this report there is discussion about the mega project of Trans-Saharan gas pipeline project. The project management planning and program management was discussed and then after this the complexities of this project are mentioned. The complexities of the stakeholders and the government are mentioned. Then there is information about the optimum bias and all the complexities of the phase management. Afterwards there is information about the supply chain management and issues in the strategic …
View Full Paper
Category Engineering
Paper Type Report Writing
Reference Type HARVARD
Words 2350

Selection of Water Reuses Technologies using Multi-Criteria Analysis (MCA)

            This chapter of the research study discuss about the experiment and methods which are used to finding out the several ways for reusing the water. There are many technologies using now day for the water treatment as well for reusing the water. The reusing of the water can be for the surface and ground water.  After selecting the several technologies for the purification of the water as well as for the reusing the water, the …
View Full Paper
Category Engineering
Paper Type Report Writing
Reference Type APA
Words 1980

Introduction of Advanced Engineering Materials

                 Anything when reduced and miniaturized to a hundredth scale of manometer, it grows new specifications. The type doesn’t matter but different abilities emerge with the miniaturization according to Chemistry Professor, Chad Mir kin at Northwestern Institute. It is actually what discovers new directions for technology and makes the nano materials and nano particles the future for taking technological devices to another step. Although they have a very strange set of physical …
View Full Paper
Category Engineering
Paper Type Report Writing
Reference Type APA
Words 1500

Report on Engineering Ethics

Introduction: This is about engineering ethics as here we discuss the tragedy that is happened in the Kansas water park. The Kansas owner hired a boy in 2016 which has no technical skills or else engineering skills according to the new lawsuit. Verruckt is designed by that boy with lacked the expertise to properly design, the water slide that killed Caleb Schwab on August 7, 2016. Now we want to learn that whether it's only …
View Full Paper
Category Engineering
Paper Type Report Writing
Reference Type APA
Words 1000

Short Essay of MATLAB Vector Quantization

               This technique is used to attain the Compact representation of an image is attaining without much data loss is referred to as image compression along with all vital information. Into two types lossy image compression could be categorized, namely as SQ (scalar Quantization) as well as VQ (Vector Quantization. For the last two decades for image source coding as well as data, speech vector quantization has been …
View Full Paper
Category Engineering
Paper Type Essay Writing
Reference Type IEEE
Words 800

Lab report Conclusion on Program PIC18f4520 using PICkit 3

In this lab experiments we used the PICkit3 to program the PIC18f4520. For the development of PIC18f4520 the hardware as well as software is used as the programmer of the debugger systems. Because the debugger systems execute the code same as the actual devices due to the use of the unique debugger chip on the behalf of emulation for the devices. The present attributes of the PIC18f4520 is accessible which can be set through MPLAB …
View Full Paper
Category Engineering
Paper Type Report Writing
Reference Type N/A
Words 200

To understand how to correct implement the constitutive behavior of Grouted anchors in a FEM Code

The grouted anchors is consist of steel rod as well as the grout product is installed into the hole drilled in the concrete harden. The grouted product is could be the cementitious and the polymer based which is installed for the hole headed, and the unheeded anchors. The grouted anchor is used when the load is greater that is carried out through post-installed anchors for installed anchors. (Lee & et.al, 2001) …
View Full Paper
Category Engineering
Paper Type Assignment Writing
Reference Type N/A
Words 1230

Conclusion on Average Current Mode Control of Switching Power Supplies

The Final year project is about “Average current mode control of switching power supplies” . In this project the aim of the project is build the buck converter by using the UC3842 of current controller . Then analysis of the model for the small signal characteristics a swell as explained the average conductor current for estimations and current strategies .In this final year project the ACME is used to minimize the different management problems …
View Full Paper
Category Engineering
Paper Type Dissertation & Thesis Writing
Reference Type APA
Words 300

Poor noise immunity of Average Current Mode Control of Switching Power Supplies

Peak method for the control of inductor current have the following functions through comparing an upslope for the inductor current have the current programme where the level is set through an outer loop a shown in background section. Turns of comparator by the power switch off when an instantaneous current reaches a desired level. A ramp current is usually small which is compared by the programming level, especially when VIN is low. The above …
View Full Paper
Category Engineering
Paper Type Dissertation & Thesis Writing
Reference Type APA
Words 2000

Literature review of Average Current Mode Control of Switching Power Supplies

        According to author Saini & et.al, (2016) it is conducted that; the ACMC for the Buck DC-Dc Converter is used for the reduction of the Voltage control Ripple control the different application like the LED lighting, correctors for the power factors and the battery charger, and eliminate the above problem the ACMC is preferred for this solution. In the two-loop converters of dc-dc, this is also a significant and well solution. The inherent benefits …
View Full Paper
Category Engineering
Paper Type Dissertation & Thesis Writing
Reference Type APA
Words 3600

Background of Average Current Mode Control of Switching Power Supplies

The FYP is “Average Current Mode Control of Switching Power Supplies” which is further dived in two parts;·         Current Mode Control (CMC)·         Voltage Mode Control (VMC)Now the implementation of the CMC is in SPS (Switching power supplies), that's since the inductor current control peak. CMC is often raising the few problems like the immunity of noise, compensation of slope, errors in peak to average current. Now by using the …
View Full Paper
Category Engineering
Paper Type Dissertation & Thesis Writing
Reference Type APA
Words 750

Introduction of Average Current Mode Control of Switching Power Supplies

For all power supply technology the controller design for SMPS has always been a complicated problem as well as also a unique topology that could be optimum is developed. For designing the control unit for the power converters there are two basics approaches that are explained below;1.      Voltage-mode control scheme2.      Current-mode control SchemeFor the PWM dc-dc power converters previously it was believed that the current mode control technique is the …
View Full Paper
Category Engineering
Paper Type Dissertation & Thesis Writing
Reference Type APA
Words 600

Aim and Objectives of Average Current Mode Control of Switching Power Supplies

        The objective of this research paper is to build the buck converter by using the UC3842 current controller. This paper aims to analyze the model that is based on the small signal characteristic and also discusses the average inductor currents estimations and the inductor current strategies. The purpose of the Average Current mode Control is to minimize the various management problems related to power, like the efficiency, size, EMI, complexity of design, transient response, …
View Full Paper
Category Engineering
Paper Type Dissertation & Thesis Writing
Reference Type APA
Words 200