Burglar alarm circuit using logic gates

Altera Quartus II Project - design and simulate an improved version of the burglar alarm
Subject
Engineering

Question Description
The project involves downloading Altera Quartus® II CAD system and proceeding with the following requirements:

You need to design and simulate an improved version of the burglar alarm with 2 windows and one door. The circuits must be implemented using only NAND gates. (see PDF for details on original burglar alarm).

The report should contain: A brief description of the project with circuit layout(schematics), the waveform resulting from the time simulation, and your analysis, including expressions, Karnaugh maps, comments and conclusions. You will use only functional simulation. Discussion in how you would implement the circuit in real life and under which considerations.

You will include snapshots of the resulting circuit and waveform obtained by you.

Proceed with the design and implementation of an Enhanced Burglar Alarm that controls the security in a residence with 2 windows and one door. The circuits must be implemented using only NAND gates. Use as guideline the circuit in pdf (See Attached PDF for original circuit) and reviewed in the videos of Quartus II. You need to include snapshots of the circuit and the waveform. NOTE: The references to guidelines reviewed about the alarm in class are attached to this question. Bonus points implementing with ALTERA boards DE2-115 (Please do this). Let Me Know Promptly If you Have any questions! Word doc attached is just restating the project guidelines (please review in case I left anything out in the message above, Thanks)