Please fully complete the work sheet provided and I need the completed PKA Cisco tracer file using the latest version of CISCO PACKET TRACER
1.Assessment Requirements
(5 points each Part)
Part 1: Develop the IPv4 Address Scheme
Part 2: Initialize and Reload Devices
Part 3: Configure Device IPv4 and Security Settings
Part 4: Test and Verify IPv4 End-to-End Connectivity
Part 5: Configure IPv6 Addressing on R1
Part 6: Test and Verify IPv6 End-to-End Connectivity
Part 7: Use the IOS CLI to Gather Device Information
Part 8: Save the R1 Configuration to a TFTP Server
1.Scenario
In this Skills Assessment (SA) you will configure the devices in a small network. You must configure a router, switch and PCs to support both IPv4 and IPv6 connectivity. You will configure security, including SSH, on the router. You will test and document the network using common CLI commands. Finally, you will save the router configuration to a TFTP server.
1.Required Packet Tracer Lab Setup
1 Router (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)
1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)
2 PCs (Windows 7, Vista, or XP with terminal emulation program, such as Tera Term)
1 Server (for TFTP)
Console cable to configure the Cisco IOS devices via the console ports
Ethernet cables as shown in the topology