Fire protection hydraulics and water supply

Fire Protection Hydraulics and Water Supply
Subject
Engineering

School
Eastern Kentucky University

Question Description
Please watch the following video (fire pump test), and download / review the attached FSE360_FirePumpTest document. Follow the instructions to complete the project. Post any questions in the Virtual Office.

https://drive.google.com/file/d/1oKowaV6DBukIH2vRG...
Please watch the like I proved above the professor will explain how to do the test

Please watch the following video and complete the fire pump test assignment: https://www.youtube.com/watch?v=wjTRxSnnOJs Fire Pump Test Assignment Using the following information, complete the fire pump test assignment forms: Fire pump: 1,550 gpm at 100 psi Bench Curve and Spec Plate Info: Rated RPM 2280 Churn (no flow): RPM 2296/ 0 gpm / 110 psi Net Head 150% rated: RPM 2288/ 2,325 gpm / 65 psi Ney Head 100% rated: Test Results: RPM 2293/ 1,550 gpm / 100 psi Net Head Churn (no flow): RPM 2310/ 0 gpm / suction: 24 psi / discharge: 141 psi 150% rated: RPM 2290/ 2,325 gpm / suction: 17 psi / discharge: 82 psi 100% rated: RPM 2298/ 1,550 gpm / suction: 18 psi / discharge: 125 psi Plot the theoretical curve (shop curve) with a BLUE pen/marker Plot the actual curve with a RED pen/maker Copyrlght2013 National Fire Protection Association (NFPA). Licensed, by agreement, for Individual use and single download on May 6, 2013 to ARC Fire Engineering for designaled user ANTHONY COLE. No other reproduction or transmission In any form permitted without written permission of NFPA. For Inquires or to report unauthorized use,' contact llcenslng@nfpa.org. Supplement 2 • Inspection, Testing, and Maintenance Fonns 627 Fire Pumps Annual Test Summary Page Date· - - - - - Inspector: - - - - - - - - - - System: - - - - - - - - - - - - - ] ( Loca~lon: ______________________________________________________________ Approximate percent of rated pump discharge (gpm)/(L/min) Nozzle size in inches (mm) Test 1 Test2 Test 3 0 1OOo/o 150% No flow Pitot pressure in psi (bar) None Flow in gpm (L/min) None Pump suction in psi (bar) Pump discharge in psi (bar) Net pump head (discharge pressure minus suction pressure) Pump speed (rpm) Operate electric circuit breaker. Test emergency power supply. Check for excessive back pressure in exhaust system. Notes Copyright © 2013 National Fire Protection Association. This form may be copied for individual use other than for resale. It may not be copied for commercial sale or distribution. FORM 52.13 Annual Test Summary Page. StaUonary Fire Pumps Handbook 2013 EKU Fire & Safety Engineering Technology ...