Gear types and characteristics

Athalon™ maximum-life filters deliver the highest level of sustained fluid system protection, across all applications, regardless of severity. Featuring an industry leading BetaX(C) = 2000* filter efficiency; the highest rated filter performance available today.(* per ISO 16889) Notes and Specifications Filter Housing• Flows to 230 L/min (60 US gpm)• Pressures to 414 bar (6000 psi)• Port Size 1¼”• Rated Fatigue Pressure: 0-240 bar (3500 psi) per NFPA T2.06.01R2-2001 CAT C/90/*(1 million cycles), verified by testing at 0-280 bar (4050 psi) for 1 million cycles. Contact Pall for applications with higher pressures at lower cycles.• Filter Element Burst Pressure: 10 bard (150 psid)• Fluid Compatibility: Compatible with all petroleum oils and most water glycols, water-oil emulsions, and synthetic hydraulic and lubrication fluids• Temperature Range: Fluorocarbon Seals: -29 ̊C to 120 ̊C (-20 ̊F to 248 ̊F) 60 ̊C (140 ̊F) maximum in HWCF or water glycol fluids•Bypass Valve Setting: 4.5 bard (65 psid)• Indicator Pressure Setting: 3.5 bard (50 psid)• Materials of Construction: Head and Cover: Ductile Cast Iron Tube: Carbon steel• Filter Element : Inorganic fibers impregnated and bonded with epoxy resins. Polymer endcaps. Anti-static media designNew: UH210 Series AthalonTMHigh Pressure Manifold Mount FiltersData Sheet M&EUH210MEN010203050604010005020023015005101500.80.60.40.21.0S20 K20 P (psid)P (bard)Flow (US gpm)Flow (L/min)• Keeps fluids the cleanest, longest, for the greatest value• Provides consistent, reliable, protection of system components over the full service life of the filter element• Rapidly achieves and sustains required fluid system cleanliness• Delivers maximum filter capacity in the smallest footprint• Prevents electrostatic discharge from damaging your filter and degrading your fluidFeatures • Patented Ultipleat (laid-over pleat) filter medium pack • Pall Stress-Resistant Technology (SRT) Media • Coreless filter element configuration • Low clean pressure drop for low energy operation UH210 Series manifold mount filter housingMultiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpmSample ∆P calculationUH210 Series 13” length housing with S20 side manifold flange using AN grade media. Operating conditions 100 L/min flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.Total Filter ∆P= ∆P housing + ∆P element= (0.27 x 1.2/0.9) bard (housing)+ ((100 x 1.70/1000) x 50/32 x 1.2/0.9) bard (element)= 0.36 (housing) + 0.35 bard (element)= 0.71 bard (10.3 psid)Element Pressure DropLength Code 04 08 13 20AP 8.51(0.467) 4.21 (0.231) 2.52 (0.139) 1.68 (0.092)AS 3.55 (0.195) 1.76 (0.096)1.05 (0.058)0.70 (0.038)AN 5.72 (0.314) 2.83 (0.155) 1.70 (0.093) 1.13 (0.062)210 Series Filter Elements – bard/1000 L/min (psid/US gpm)AT 2.69 (0.029) 1.33 (0.073)0.80 (0.044)0.53 (0.029) AZ20.07(1.102) 9.93 (0.545) 5.95 (0.327) 3.95 (0.217) Pressure Drop InformationHousing pressure drop using fluid with 0.9 S.G. Housing pressure drop is directly proportional to specific gravity.
Ordering Information For new installations, select one complete part number from each section belowSeal Kit P/N: SH 210 SKZ*Other seal material options are available; Contact Pall.Note: Pall Athalon filter housings are supplied without filter elements or warning devices fitted. Never operate the filter unless a filter element is fitted and all warning device ports are sealed.Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall. Housing P/N designates indicator port fitted with a plastic shipping plug. Housing P/N: UH210 Table ATable BSection 1CodeKSPort StyleTop Manifold MountSide Manifold MountTable 1: Housing Port OptionsMax. Operating Pressure414 bar (6000 psi)414 bar (6000 psi)CodeG3G3HG6G6HBypass Valve and Service Type 4.5 bard (65 psid) bypass valve, Cap service, metric port 4.5 bard (65 psid) bypass valve, Head service, metric port 4.5 bard (65 psid) bypass valve, Cap service, imperial port 4.5 bard (65 psid) bypass valve, Head service, imperial portTable 4: Bypass Valve and Service Options Code20Port Style1¼” nominalTable 2: Port Size Code04Z 08Z13Z20ZLength and Seal Material4” nominal length, fluorocarbon seals 8” nominal length, fluorocarbon seals13” nominal length, fluorocarbon seals20” nominal length, fluorocarbon seals Table 3: Housing Length and Seal Options K2004Z K2008Z K2013Z K2020Z S2004Z S2008Z S2013Z S2020Z Table APort & Length OptionsTables 1, 2 and 3Table BBypass & Orientation OptionsTable 4G3 or G6 G3 or G6 G3 or G6 G3 or G6 G3, G6, G3H, or G6H G3, G6, G3H, or G6H G3, G6, G3H, or G6H G3 or G6 Section 2Element P/N: UE 210 Table 5Table 3Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205CodeAZAPANASATCST Rating*07/04/0111/08/0313/09/0415/11/0616/14/08ßx(c) ≥2000 based on ISO 168893571225Table 5:Filter Element Options Section 3(At least one Differential Pressure Indicator or ‘B’ type blanking plug must be ordered)Differential Pressure Indicator P/N: RC Z091 Z Table 6Table 7Note: If no differential pressure indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered separately and fitted to replace the plastic shipping plug.Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.CodeOmitSSPressure SettingBrass IndicatorStainless Steel Indicator: recommended for high pressure cycle applications with pressures > 200 bar (3000 psi)Table 7: Differential Pressure Indicator MaterialOther setting options are available; contact Pall.CodeA218MA218RA219DBrass Option indicator Electrical switch (SPDT) with Hirschmann connectorElectrical switch (SPDT) with Hirschmann connector with Red and Green LED indicatorsVisual indicatorTable 6: Indicator Options Other options available; contact Pall.*Requires YM suffix after SS code from Table 7CodeStainless Steel indicator778NZ Visual filter with thermal lockout 861CZ Electrical Switch (SPDT) with 6” leads 861CZ* Electrical switch (SPDT) with Hirschmann connector 771BZ Electrical switch (SPDT) with 3-pin