Packet tracer projects pdf

Page 1 of 4

IT INFRASTRUCTURE PROJECT PHASE I INSTRUCTIONS

All labs must be submitted using the version of Packet Tracer in the online course/learning

management system. Please do NOT use other versions of Packet Tracer to assure licensing

compliance and proper assessment/credit. In addition, please do NOT add users or passwords to

any device, leave all credentials blank for assessment purposes.

Project Background

Please reference Figure 1. Friendly Care Hospital is one of the biggest hospitals in DC. You

have recently bought the hospital, naming it [Your Firstname Lastname] Hospital. For example,

Jane Doe Hospital. Jane Doe Hospital owns a 5-story building and houses many departments

that span multiple floors. Its Radiology department is spread across the first and second floors,

connected by a dedicated local area network (LAN). The department has recently deployed a

new “Radiology Images” application as part of their initiative to digitize patient records.

However, the department staff sometimes faces long application delays during busy hours. It also

experiences regular delays in Internet connectivity, FTPS services, web services, and email

services.

Their original design, depicted in Figure 1, was categorized as a small network, providing

services for up to 200-500 devices. They have well surpassed this. You, as their senior network

administrator, are tasked with the job of a complete re-design. This design must support a

medium to large sized network for over 1,000 devices. Thus, it should surpass the current

capabilities.

Figure 1. Current Friendly Care Hospital Network Design

Page 2 of 4

Project Overview

In this project, you will study performance improvements in a congested, wired LAN/WAN

environment that can be solved to varying degrees by a new IT infrastructure design and fully

functional implementation in Packet Tracer. To learn more about Packet Tracer please read the

Cisco Packet Tracer DS PDF. Later, in Phase II of the project, you will scale this design to a

larger enterprise IT infrastructure.

To begin the projects, you will complete a review of related literature to identify what is

appropriate to improve system feasibility, RAS (reliability, availability, serviceability), security,

and disaster recovery of the existing IT infrastructure and model of your hospital. Once this

review of literature is complete, you will use the outcomes and research results to advance and

improve the IT infrastructure. Proper data analysis, comparison, and contrast will be

summarized within in-text tables and figures as well as appendixes to explain the results of the

IT infrastructure re-design and improvement.

Packet Tracer is limited given it is a simulator. Be creative! For instance, if Packet Tracer does

not have a file sharing service for a file sharing server, turn on any other related and relevant

services that are available. As another example, use LAN and WAN protocols that are optimal

given what the version of Packet Tracer allows. You will be assessed based upon optimal

configurations in the version of Packet Tracer used. Thus, assure this is well studied. Research

will outline new opportunities for future IT infrastructure designs, and this should be discussed

accordingly in the written paper even if not configured in Packet Tracer. Often, new technologies

are not implemented in industry immediately due to limitations such as hardware architecture.

Please verify all requirements are met by reviewing the grading rubric. Below is an outline of

minimum requirements with examples and ideas.

Minimum Project Requirements

• Submit a working Packet Tracer lab, typically this file has a .pkt file extension. o This will include the fully operational new IT infrastructure design o All devices in the lab must be named with your first name and last name

▪ Example: Jane_Doe_Router_1 o All hardware and software should be configured properly and should be able

to communicate using optimized networking designs, configurations, and

protocols

o No devices should have passwords for assessment purposes

• Minimum IT Infrastructure Design and Packet Tracer Requirements o You must start with a blank/new Packet Tracer file, existing labs or modified

labs of existing solutions will receive a zero without exception

o Design a medium-size hospital IT infrastructure for well over 1,000 devices, and scalable beyond the Figure 1 example

▪ For example, a design that goes beyond traditional N-Tier designs ▪ Design proper addressing via IPv4 and/or IPv6 that scales ▪ Add appropriate routers and switches to support this new design ▪ Configure at least one appropriate networking protocol, operational

across the entire infrastructure

▪ Use proper network address translation (NAT) ▪ Implement private and public IP address spaces correctly

Page 3 of 4

▪ Assure network traffic is organized, efficient, and secured properly (e.g. limit broadcast domains, do not allow marketing employees to

access accounting systems, etc)

o Add an Internet Service Provider (ISP) into the design o Add enough modularity, resiliency, and flexibility into the design o Design and implement the following new services and servers

▪ A Dynamic Host Configuration Protocol (DHCP) server that automatically assigns working IP addresses to new workstations

▪ A name server that manages the Domain Name System (DNS) for all servers in the hospital

▪ A web server hosted on the Internet ▪ Two new user workstations located at each level of the building that

can use the new services properly

• Show these services working on each workstation in your project (e.g. a website from the web server, DHCP, etc)

• Provide a few hospital departments as examples beyond radiology

• Minimum Written Requirements (Introduction, Literature Review, and Conclusion) o Submit a properly formatted APA paper in Microsoft Word o Here are example templates to follow:

https://owl.english.purdue.edu/owl/resource/560/18/

https://apastyle.apa.org/manual/related/sample-experiment-paper-1.pdf

o If the links break, search for “APA Example Papers” to assist o Table of Contents that automatically adjusts page numbers of the main

headings

o Introduction ▪ Introduce the primary goals and objectives of the project

o Review of literature that supports the new system simulation, model, and design

▪ Include appropriate IT frameworks and standards in which to design the new system

▪ Address system feasibility, RAS (reliability, availability, serviceability), security, and disaster recovery

▪ Include at least 10 scholarly journal articles focusing on relevant research on the problems being addressed

▪ Recommend new design additions based upon current literature o Packet Tracer design explanation

▪ Explain each of the additions and improvements ▪ Use alternative protocols and services where necessary to emulate the

best possible working infrastructure for the hospital within Packet

Tracer

▪ Reference the primary configurations and how these were developed ▪ Include running configurations from routers/switches as appendices

o Conclusion ▪ Highlight any limitations, managerial implications, and conclusions of

the project deliverables and outcomes

https://owl.english.purdue.edu/owl/resource/560/18/

https://apastyle.apa.org/manual/related/sample-experiment-paper-1.pdf

Page 4 of 4

• Save the file as Lastname_Firstname_ProjectPhaseI. Include your name in the assignment file itself and submit your file to Blackboard.

• Any assignment without working Packet Tracer files or without screenshots that do not include a visible date and timestamp from the operating system and a

unique desktop element to identify the student’s work will not be accepted.

• To copy screenshots to Microsoft Word:

o Press the “Print Screen” key on your keyboard. The key is usually located at the upper right corner of a keyboard.

o You can also use the “snipping tool” in Windows

o For Windows users, open application “Paint” and paste the screen shot over. “Paint” usually can be accessed this way: Start → All Programs →

Accessories. For users of other operating systems, use a similar application.

o In “Paint”, select the graph or area needed and copy it. You need to click this

icon in order to be able to select an area. The icon is listed on the left side

of the window.

o Paste the selected area to a word processor.

o Save the file as Lastname_Firstname_ProjectPhaseI