The ______ states that two species cannot coexist indefinitely in the same niche.

Edited by Jessica E. Fultz for the Department of Biology.

Updated January 10, 2014

Concepts in Biology Laboratory

Biol 1100L

Spring 2014

Please note that this manual is a work in progress and was compiled specifically for the ISU Biology department. It changes each semester/session depending on the interests of the instructors. It is

a free and unpublished manual that has not seen reviewers or editors; there are errors.

The first step in the acquisition of wisdom is silence, the second listening, the third memory, the fourth practice,

the fifth teaching others.

~Solomon ibn Gabirol (1021 -1058 AD)

1-1

Biol 1100L Ecology1 Lab 1

1. Define hypothesis using your textbook.

Name:_______________________________ Section:____

In lab this week you will gather observational data about arthropod distributions and ecol- ogy, describe their niches in terrariums, construct a hypothesis, make a prediction, and calculate the diversity (Shannon-Weiner Diversity Index) for each niche type. Arthropods are a major component of all terrestrial ecosystems and their behavior has been the object of many famous ecological studies. All arthropod species are in the Kingdom Animalia and Phylum Arthropoda but they are in many different classes, orders, and families. A large proportion of arthropods are plant detritivores, i.e. organisms that feed on dead and decaying plant material. These organisms hasten the conversion of biomass to soil, speed up rates of nutrient cycling, and as a result, increase the productivity of ecosys- tems. In this lab you will learn about three very important ecological concepts: diversity, niche and the competitive exclusion principle. Diversity can be measured in a number of different ways, and you will use the Shannon-Weiner Diversity Index. The niche is a set of environ- mental factors necessary to the continued existence of a species. The niche describes anything you might be able to think of that an organism requires. This includes what it eats, where it eats, when it eats, when it sleeps etc. The competitive exclusion principle states that two species with identical niches cannot coexist indefinitely (Gausse 1934). It makes sense that species that coexist will have different niches. If they didn’t they would either be in the process of going extinct or driving their competitor into extinction. The way species subdivide niche space has been called niche partitioning.

Figure 1-1. Diagram of an arthropod terrarium.

Part 1. Defining Niches

One of the members of your group will obtain a terrarium and poking / digging tools from the west end of the lab. Do not do anything to the terrarium yet. Note the overall structure of the terrarium ecosystem (Fig. 1-1). As a group talk about the different ways the species of arthropods could partition this niche space to avoid identical niches. Be prepared to present your group ideas to the class. Decide as a class on 4 distinct niches that would be good to use. All groups of students must use the same niches to continue with the exercise.

2. What is an example of a hypothesis (see textbook)?

1-2

Biol 1100L Ecology1 Lab 1

3. What are the niches you and your classmates identified for the terrarium? 1___________________ 2___________________ 3___________________ 4___________________

4. As a class construct a hypothesis about arthropod abundance and diversity of each niche.

Table 1-1. Abundance of arthropod types from ter- rarium #_____.

Arthropod Niche

1 2 3 4 cricket isopod millipede bess beetle tenebrio beetle other 1 other 2 Total Abundance

5. As class make a prediction about arthropod abundance and diversity of each niche.

Part 2. Data Collection

Observe your terrarium. Carefully, without disturbing the other niches, search one niche for arthropods. Be gentle and care-

ful (we don’t want to harm any of the arthropods). As you find an arthropod place it in the plastic holding chamber.

6. Fill in the appropriate niche/arthropod cell in Table 1-1 with count data using tick marks. NOTE: do not count dead arthropods.

Repeat for all the niches.

Part 3. Data Analysis

To calculate diversity biologists use indices that are based on mathematical equations. For this lab you will use the diversity spreadsheet linked to Moodle to calculate the Shannon-Wiener Index (H’) which is calculated as -Σ(pi ln pi). This index is an indicator of the evenness and richness (i.e. number of arthropod species and the abundance within each species) within an environment. H’ ranges upwards from 0. The 0 value indicates a single species and increases as richness and evenness increases. When you have completed your observations, each group will provide their niche totals from Table 1-1 to the class.

1-3

Biol 1100L Ecology1 Lab 1

7. Calculate a class average using the Excel spreadsheet linked to Moodle for each arthro- pod type in each niche and enter that average into Table 1-2.

8. Using the class averages, cal- culate Shannon- Wiener Diver- sity Index (H’) for each niche using the Ex- cel spreadsheet provided and fill in Table 1-3.

Table 1-2. Average abundance of arthropod types from all terrariums studied.

Arthropod Niche

1 2 3 4 cricket isopod millipede bess beetle tenebrio beetle other 1 other 2 Total Average Abundance

Table 1-3. Shannon-Wiener Diversity Index (H’) for each niche.

Niche H’ 1 2 3 4

9. In a complete sentence and in your own words define the Shannon-Wiener Index (H’). What two important factors are taken into account by the Shannon-Wiener Diversity Index?

10. Did you conclude that your prediction was true or false for the diversity of arthropods per niche?

11. Did you accept or reject your hypothesis?

12. In retrospect would you have modified your selection/distinction of niches?

13. Did the taxonomic descriptions in the appendix appear to agree with the niches you saw the arthro- pods in?

1-4

Biol 1100L Ecology1 Lab 1

Cricket Class: Insecta Order: Orthoptera Family: Gryllidae

Bess Beetle Class: Insecta Order: Coleoptera Family: Passalidae

Darkling Beetle Class: Insecta Order: Coleoptera Family: Tenebrionidae

Isopod (Pill bug) Class: Malacostraca Order: Isopoda Family: Armadillidiidae and Porcellionidae

Millipede Class: Diplopoda Order: Spirobolida Family: Spirobolidea

This group of insects is closely related to grasshoppers that are in the Family Acrididae. Most species of crickets overwinter as eggs. All crickets have auditory organs on their front tibia. The male cricket rubs its wings together to make a chirping sound. The young cricket, or nymph, looks like an adult except that it is smaller and not sexu- ally developed. Crickets are generally scavengers that will eat essentially anything.

These are large (32-36 mm long) shiny black beetles. The mouth is adapted for chewing wood. Passalids are somewhat social and their colonies live in decaying logs. The adults can produce a squeaking sound by rapidly rubbing their third legs against their fifth abdominal sec- tion. All beetles undergo larval and pupal stages before emerging as adults.

These dark brown flying beetles are also known as dark- ling beetles. Most tenebrionids feed on plant matter of some kind and often live in cornmeal, dog food, cere- als, and dried fruits. The Tenebrionidae is the fifth larg- est family of beetles with over 1000 species in North America.

These organisms are actually crustaceans and are closely related to crabs and lobsters. The name isopod literally means equal-legs. Individuals in this group are often found under boards and decaying wood. They eat wood and logs as they decay. Isopods breathe with gills so they must live in an area that is constantly moist.

Millipedes are elongate wormlike animals with many legs. Most millipedes have 30 or more pairs of legs. They tend to avoid light since they have eyespots on their heads that are sensitive to light. They live on dead leaves or other decaying material.

14. Do you feel you have made an adequate description of niche space of these arthropods? Why or why not?

15. Which niche was most diverse? Why do you think this is the case?

2-1

Biol 1100L Population Ecology Lab 2

Name:_______________________________ Section:____

Part 1. Population Study

A summary of mortality, survivorship, and ex- pectation of further life by age, is called a life table. The most straight forward type of life ta- ble starts with a cohort of young organisms and follows their fortunes through their lives, until the last one dies. Because cohort data are usu- ally difficult to obtain, most life tables are calcu- lated using other kinds of information. If we can obtain mortality rates by age of a population we can, after the appropriate assumptions and cal- culations, construct a life table (called a time- specific table, versus the age-specific cohort table). A frequent approach, and the one used here, is to use age at death to estimate mortal- ity rates and calculate the other vital statistics from that. Tables produced in this way are age- specific, even though the cohort is composite, made up of individuals that started life in differ- ent years. The study of human populations is called de- mography and is a branch of science called population ecology. A population is defined as a species (interbreeding individuals) within a de- fined area. In this lab, we will be exploring the Idaho Falls population. Using the data that was collected from the Rose Hill Cemetery of Idaho

Table 2-1. Life table of the Idaho Falls population pre-1930 and post-1970. Where x is the beginning age of the age class, nx is the number alive (survivors) at age x, lx is the proportion of survivors at age x, dx is the number dying (mortality )within the age class x, and qx is the mortality rate (that is, dx/nx).

Table 2-2. Data collected from the Idaho Falls Rose Hills Cemetery during Spring 2010. Also known as mortality (dx) pre-1930 and post-1970 of the Idaho Falls popula- tion.

Falls (Table 2-1), the life table (Table 2-2), and the survivorship curves (Fig. 2-1) constructed you will answer a few questions.

2-2

Biol 1100L Population Ecology Lab 2

1. Look at circle A on Figure 2-1. Why do you think there is a steep decrease in survivorship for the pre-1930 population?

2. Comparing pre-1930 and post-1970 populations, has the proportion of people surviving through an age class increased or decreased for the Idaho Falls population (excluding the last two age classes)?

3. What has changed since pre-1930 to make an increase in survivorship possible?

4. Do you think this is similar for the entire US population?

Figure 2-1. Proportion (as a percentage) of survivors (lx) at age x of the Idaho Falls population pre-1930 and post-1970.

A

2-3

Biol 1100L Population Ecology Lab 2

Part 2. Ecological Footprint

Lifestyle in advanced nations like the US depends significantly on the direct or indirect burning of fossil fuels. Many people in less developed nations, however, do not depend on large-scaled burning of fossil fuels. Imagine a subsistence farmer in an undeveloped country living in a mud hut without electricity or running water. The family is fed from the small herd of animals and crops adjacent to its dwelling. The family does not own a car, and travel to the next village requires an ox and a cart. The family does not own any electrical appliances or electronic media. Consider another family in a more developed part of the world but less developed than North America or Western Europe. The family has electricity in its small home, but it does not own a car and has just bought its first TV. The father rides his bike to a nearby village for work. The mother walks to the local village market three times a week for local produce and meat. The atmospheric CO2 level was approximately 280 parts per million (ppm) before the industrial revolu- tion and is now 393 ppm (in 2005 it was 387 ppm). A greenhouse gas, CO2, is emitted from a variety of sources, many of them associated with the burning of fossil fuels. For example, when you drive a car, the exhaust emissions include CO2. When you heat or cool your home the required energy often comes from the burning of fossil fuels in power stations. But have you ever stopped to think that your diet may play a role in CO2 emissions? If you eat meat and shop for it at a supermarket chain, there is strong chance that the source of your T-bone steak is a distant slaughterhouse. In winter, the lettuce that makes up the bulk of the salad you eat may be shipped from tropical locations. Your steak and lettuce than travel by truck to reach your supermarket delicatessen or produce counter, contributing to CO2 emissions along the way. In 2007 the biosphere had 11.9 billion hectares of biologically productive space corresponding to roughly one quarter of the planet’s surface. These 11.9 billion hectares of biologically productive space include 2.4 billion hectares of ocean and inland water and 9.1 billion hectares of land. The land space is composed of 1.6 billion hectares of cropland, 3.4 billion hectares of grazing land, 3.9 billion hectares of forest land, and 0.3 billion hectares of built-up land.

One of the ways that you can visualize your own personal impact on the ecology of the planet is to calculate your Ecological Footprint. In this activity you will use the Global Footprint Network to determine your Ecological Footprint.

5. Use the Global Footprint Network glossary to define the following; 1) gha, 2) biological capacity (biocapacity), 3) biological capacity per person, and 4) ecological footprint.

http://www.footprintnetwork.org/en/index.php/GFN/

2-4

Biol 1100L Population Ecology Lab 2

6. What kinds of behavior reduce Ecological Footprints?

7. Use the Global Footprint Network website to calculate your footprint. You must enter “Detailed Information”. Fill in Table 2-3.

Table 2-3. Your Ecological Footprint. http://www.footprintnetwork.org/en/index.php/GFN/page/calculators/

Food Shelter Mobility Goods Services Planets GHA Carbon Dioxide

8. Look at Figure 2-2 A and B: A. What is the biocapacity per person for the USA? B. What is the Ecological Footprint of consumption for the USA. C. How do these numbers compare to the majority of the world?

10. Look at Figure 2-2 D and E: A. Is the USA a creditor or debtor nation? B. What is the USA’s Ecological Footprint percentage over domestic biocapacity? C. What is the USA’s Ecological Footprint percentage over globally available biocapacity? D. How do these numbers compare to the rest of the world? E. How can the USA become a creditor nation if our domestic consumption is 8 gha per person

but our domestic biocapacity is 3.87 gha per person and the global biocapacity is 1.78 gha per person?

9. How does the USA’s Ecological Footprint of consumption (Figure 2-2 B) compare to Ecological Footprint of production (Figure 2-2 C) and how does this compare to the majority of the world?

2-5

Biol 1100L Population Ecology Lab 2

11. Look at Figure 2-2 F: A. Is the USA a net importing or exporting country?

B. How many gha do we import each year? C. Could the USA Ecological Footprint be reduced if our net import of biocapacity were reduced?

Questions for Discussion:

12. Earlier you saw that the pre-1930’s Idaho Falls population had lower survivorship than the post 1970’s population. Do do you think the trends shown for pre-1930’s Idaho Falls’ population could be similar to those of present day developing nations?

13. If our entire US population was considered a developing nation pre-1930’s, what does this tell you about future consumption and carbon footprints of today’s developing nations?

14. Do you think this is sustainable?

2-6

Biol 1100L Population Ecology Lab 2

Fi gu

re 2

-2 . B

io ca

pa ci

tie s

(A ),

E co

lo gi

ca l F

oo tp

rin ts

(B a

nd C

), ec

ol og

ic al

c re

di ts

a nd

d eb

its (D

a nd

E ),

an d

im po

rti ng

a nd

e xp

or tin

g (F

). Ta

ke n

fro m

th e

E co

lo gi

ca l F

oo tp

rin t

A tla

s 20

10 (h

ttp ://

is su

u. co

m /g

lo ba

lfo ot

pr in

tn et

w or

k/ do

cs /e

co lo

gi ca

l-f oo

tp rin

t-a tla

s- 20

10 /1

?m od

e= a_

p) . N

ot e;

F ig

ur e

F N

et im

po rti

ng c

ou nt

rie s

im po

rt m

or e

bi oc

ap ac

ity th

an

th ey

e xp

or t a

nd h

av e

an E

co lo

gi ca

l F oo

tp rin

t o f c

on su

m pt

io n

gr ea

te r t

ha n

th ei

r E co

lo gi

ca l F

oo tp

rin t o

f p ro

du ct

io n.

T he

o pp

os ite

is tr

ue o

f n et

e xp

or tin

g co

un tri

es .

2-7

Biol 1100L Population Ecology Lab 2

2-8

Biol 1100L Population Ecology Lab 2

3-1

Biol 1100L Biodiversity Lab 3

It is estimated that there could potentially be 30 million species on Planet Earth. The two million species that have been described and named are organized into three domains (Figure 3-1); Bacteria, Archaea, and Eukarya. These domains are further organized into smaller and smaller groupings. Today you will learn more about this system of organization and over the next five labs you will be introduced to a variety of organisms.

Part 1. Systematics

The study of the diversity of organism and of the relationships between them is the scientific field of systematics. Systematics is important because it creates the foundation upon which all other biological disciplines are based. Phylo- genetic systematics provides methods for infer- ring evolutionary relationships. Relationships are inferred by distinguishing between charac- ters that represent an ancestral condition for the organisms in question and those that represent the derived condition. Shared derived charac- ters among organism are evidence of common ancestry. A phylogenetic tree (Figure 3-2) is graphical representation of the evolutionary re- lationship between taxa.

2. Who are you and your hypothetical sister’s most recent common ancestors?

Figure 3-2. Each node along a branch of the phylo- genetic tree represents a population that lived at a particular point in time. The root is the original popu- lation. Nodes mark the population that split to pro- duce two daughter populations. The tips represent the populations that are currently living (extant).

Imagine that you have a sister and a cousin. Your sister and you share ancestors, your mother and father. You and your sister share other ancestors too as do you and your cousin. These may include your father’s or mother’s parents, their parents, and so on. Evolutionary biologists refer to the ancestors two individuals

share as common ancestors (held in common or shared). You are more closely related to your sister than to your cousin because your most recent common ancestors with your sister (your mom and dad) lived more recently than your most recent common ancestors with your cousin (your grandparents). We can use similar reasoning in thinking about the evolutionary relationships among populations and species.

Name:_______________________________ Section:____

Figure 3-1. A phylogenetic tree of the three domains of life.

1. In the following diagram label the arrows most recent common ancestor and the root.

3-2

Biol 1100L Biodiversity Lab 3

3. Who are you and your hypothetical cousin’s most recent common ances- tors?___________________________

4. Who are you more closely related to, your sister or your cousin? Why?

5. Who lived more recently your most recent common ancestors with your sister, or your most recent common ancestors with your cousin?___________________________

6. In the diagram: A. Which arrows (x, y, or z) point to the

most recent common ancestor of 1 and 3?

B. Which arrow points to the most recent common ancestor of 1 and 2?

C. Which lived most recently, the most re- cent common ancestor of 1 and 3, or the most recent common ancestor of I and 2?_____________________________

D. Is 2 or 3 more closely related to the 1? _______________________________

E. Draw an arrow on the diagram showing the direction of time.

Part 2. Taxonomy

The discipline of systematic encompasses the field of taxonomy which is the classification, de- scription, and naming of groups of organisms. Since the 18th century, biologists have sub- scribed to a standard protocol for the descrip- tion, naming, and classification of organisms. Classification is a utilitarian product of system- atics, a tool that provides names for groups of species and serves as a way to retrieve in- formation. It allows people across the country and world to communicate more efficiently with each other.

The fundamental unit of classification is the species. Most often a species is defined as a group of individuals that are capable of inter- breeding under natural conditions producing fertile offspring.

In formal biological classification, species are grouped according to estimates of their simi- larity or relatedness. Such groups are called taxa (singular, taxon). The taxa are listed in a hierarchical pattern. The most commonly used groups in the system of zoological classification are shown in Table 3-1 (listed from the most in- clusive to the most exclusive):

In this system, the animal kingdom is divided into a number of phyla (singular, phylum). Each phylum is divided into classes, classes into or- ders, orders into families, families into genera (singular, genus) and genera into species. A classification developed for a taxon will be af- fected by the particular characters used, the

Table 3-1. Example of a taxonomic classification. Taxa Syringa American Elk Domain Eukarya Eukarya Kingdom Plantae Animalia Phylum or Division Magnoliophyta Chordata

Class Magnoliopsida Mammalia Order Rosales Artiodactyla Family Hydrangeaceae Cervidae Genus + specific name

= species name

Philadelphus lewisii

Cervus canadensis

3-3

Biol 1100L Biodiversity Lab 3

relative weight given, and how they are ana- lyzed. If different characters or weighting is used a different classification will arise.

Animals have two types of names, common and scientific. Every animal taxon has a unique scientific name that is used throughout the world. Common names are less precise and can cause confusion because the name can be used for several different species. Also, the ma- jority of species do not have a common name. The scientific name of a species is binomial and is always italicized. The name consists of two words the genus name and the specific name. For example the American Elk’s scientific name is Cervus canadensis.

A dichotomous key (Figure 10-3) is a device used to identify an organism through several steps. At each step (called a couplet) a choice must be made between two alternatives based on the presence of certain characters. Usually the characters are morphological (that is they are based on the form or shape of an organ- ism). Each alternative will lead to another cou- plet or to the name of the identified organism.

7. Use the key in Figure 3-3 to determine the phyla of unknowns A-D: A._______________________________

B._______________________________

C._______________________________

D._______________________________

Figure 3-3. Dichotomous key to some of the animal phyla. Adapted from a key made available by the UCLA Marine Science Center.

3-4

Biol 1100L Biodiversity Lab 3

Part 3. Flowers and Trees*

SimBio1 EvoBeaker™ Flowers and Trees is a computer simulation program to help guide you through the process of understanding how inheritance, variation and the origin of new variation can, over time, produce biodiversity. The exercise relies on an example using a wild flower called columbine.

8. Observe Figure 3-4:

A. What is the common and species name of this flower?

B. What kinds of animals do you think access the nectar in columbine nectar spurs?

Figure 3-4. The columbine flower, Aquilegia flavescens.

A. Designer Flower

Launch SimBio EvoBeaker. Select Flowers and Trees from the Lab options and Designer Flower from the drop down Experiment Menu. The model columbine populations you will ex- periment with live on a series of peaks in the Rocky Mountains in Western North America. These peaks are shown as squares on left side of the EvoBeaker window. Because our model columbines thrive only at high-mountain peaks, peaks are islands of good habitat floating in a sea of poor habitat.

Columbine seeds typically do not travel far. In- stead, they drop to the ground near their par- ents. The mountain peaks in our model are far apart, so columbine seeds rarely move from one peak to another. A seed can make such a trip only if it gets picked up an extraordinarily strong wind, or if it stuck to the hoof of an elk or the foot of a hiker.

There are 8 flower traits that you will look for in the model columbines. To see the traits,

3-5

Biol 1100L Biodiversity Lab 3

double click on one of the tiny flowers, such as the one on Peak 1. You will see a Trait Editor window appear. This window contains an enlarged view of the flower, plus the 8 traits listed in pull-down menus.

Find the trait listed as Anthers. The columbine you found on Peak 1 has white anthers. To mutate the flower so it has yellow Anthers select Yellow from the pull-down menu next to the word Anthers. Go to each of the other traits and mutate them back and forth between their two states. As you do so, ex- amine the changes in the enlarged cartoon flowers until you are familiar with what each of the traits looks like.

When you are done, close the Trait Editor window.

B. Growing Trees

Imagine that only one of our seven peaks is inhabited by columbines, and that as this population evolves over time, seeds occasionally make the long trip from one peak to another to establish a new population. If you could watch this happen over hundreds of generations, what would you see? Evo- Beaker summarizes the events you would witness in a diagram called a phylogenetic tree.

To see this, go to the Experiment menu and select Growing Trees The ancestors of the columbines in our mountain range blew in as seeds several years ago and landed on one of the peaks. You can see the population of flowers now living there. Click on the GO button to let time advance until the original population splits into two populations. Then stop the model by clicking on the STOP button.

Each year as the model runs, all the old flowers set seed and then die. The following spring, the seeds sprout, grow up, and flower. Normally seeds stay on the mountain peak of their parents, but once in a long while, a fierce storm comes through and carries a seed from one peak to another, es- tablishing a new population, which you just watched happen. Look at the evolutionary tree in the Note- book panel.

9. Describe how the division of one population into two is represented in the tree diagram.

Every so often, a mutation happens in an individual flower in one of the populations. The program indicates this by changing the color of the tiny icon that represents the individual flower. The model is rigged so that new mutations quickly spread through the population in which they arise. Continue run- ning the model with the GO button until you see the color of the flowers on one of the peaks change. When the change has spread through all flowers on that peak, STOP the model.

10. In addition to the change in color of the little flowers in the Peaks, describe how the change in a trait is represented on the evolutionary tree diagram. (Hint: it is shown in two places on the tree diagram - look at both the tree itself and at the pictures of the flowers at the branch tips.)

11. As the changes were happening, time was moving forward. Aside from the time scale on the left, how is the movement of time represented in the evolutionary tree?

3-6

Biol 1100L Biodiversity Lab 3

Each time a seed blows from one peak to another, we say that the tree diagram splits. The tips of the two resulting branches are the two new populations, drawn at the top of the tree to show that they are currently alive. The base of the two branches come together to show that both new populations came from the same parent population. This parent is the most recent common ancestor of the two new populations. Continue running the model until populations have become established on a couple of other peaks, and then stop the model.

Time is shown at the bottom of the main window. Run the model until 1000 years have gone by. Be patient - evolution takes time. Watch the action both on the mountain peaks and on the evolutionary tree. At the end, look at the pictures of the flowers at the tips of the tree branches. Pick a flower picture at the tip of the tree diagram (representing one of the living mountain peak populations). Follow its branch all the way to the base of the tree.

12. Does the flower picture at the tip reflect all the trait changes that occurred among its ances- tors?___________

C. Building and Reading Trees

In the Experiment menu, select Simple Evolving Flowers. The setup here is the same as last time, except that there are only 1 mountain peaks and traits for each flower. The Notebook on the right will still show the evolutionary tree as it grows, but now no changes will occur unless you make them happen. Start the model running by clicking on the GO button. Let time advance for 40-60 years so there is a little trunk at the bottom of the tree. Then stop the model by clicking on the STOP button. In Part 3.B. you watched as mutations appeared on their own in the columbine populations. In this experiment. You will play mutator, changing the traits of flowers at your whim. Start by changing the anthers of one of your flowers from white to yellow. To do that, double-click on one of the flowers in the Peak I population. A Trait Editor window will appear. Change this flower to have anthers that are yellow by selecting Yellow from the Anthers pull-down menu. Don’t change any other traits right now. Close the Trait Editor window. Run the model again for 40-60 years by clicking on the GO button. Look at the evolutionary tree. Notice that, as in the last experiment, there is a label showing when the new trait appeared. Note also that the picture at the top shows the current living population with the new trait. Your evolutionary tree should now look like the one shown here. The evolutionary tree traces the 80 or so previous generations that are ancestors of your current Peak 1 popula- tion.

13. What color are the anthers of the present population? ________________

14. What color are the anthers of the ancestral population? ________________

15. There are no storms modeled in this experiment. Instead, you will establish new flower populations on the other peaks yourself by traveling with seeds stuck to your hiking boots. Before doing this, draw a diagram of what you think the evolutionary tree will look like when you carry a seed from Peak I to establish a new population on Peak 2. You don’t have to draw pic- tures of the flowers at the tips, just use the names of the populations.

3-7

Biol 1100L Biodiversity Lab 3

Now go ahead and carry a seed from Peak I to Peak 2 by clicking on a flower in Peak I, holding your mouse button down, and dragging the flower to Peak 2. Start the model running again and run it for 40-60 years . Stop the model and look at the tree. 16. Was your diagram prediction correct?____________

Over time, new traits could arise in the population on either mountain peak that make the flowers on the two peaks look different. 17. What will the tree diagram look like if the flowers on Peak 1 mutate to have pointy petal tips.

Change the petal tips of a flower on Peak I to “pointy” (using the Trait Editor). Close the Trait Editor and run the model for another 40-60 years. Compare the pointy-petal diagram on the screen to the one you drew. 18. Was your pointy-petal diagram prediction correct?__________

Now click and drag one of the flowers from peak 1 to 3 and run the model for 40-60 years. Make the following changes happen, being sure to run the Model for 40-60 years between each one.

• The population on Peak 3 acquires dark petals

• 40-60 years • A hiker carries a seed from Peak I to

Peak 4

• 40-60 years • The population on Peak 4 acquires long

spur bottoms • 40-60 years

3-8

Biol 1100L Biodiversity Lab 3

1©2008, SimBiotic Software for Teaching and Research, Inc. All Rights Reserved.

19. Draw the resulting diagram: A. Label:

• b - most recent common ancestor of the populations on Peak 1 and Peak 3 • c - most recent common ancestor of the populations on Peak I and Peak 2 • d- most recent common ancestor of the populations on Peak 3 and Peak 2

B. Approximate the amount of time shown on screen between: • Peak I population and b _____________ • Peak I population and c _____________ • Peak 3 population and b _____________ • Peak 3 population and d _____________

20. Have more years passed since the Peak 3 population split from Peak I at b, or since the Peak 3 population split from the Peak 2 population at d? _______________________________________

21. Have more years passed since the Peak I population split from Peak 3 at b, or since the Peak I population split from Peak 2 at c? ___________________________________________________

22. Is the population at b a descendent of c or is the population at c a descendent of b? ________________

23. Given how much time has passed from each ancestral population to the current populations on the mountain peaks, write down the order of relationships (which population is most closely related to which other) among the four currently living populations. Next explain why they have that rela- tionship based on the amount of time that has passed from each common ancestor.

4-1

Biol 1100L Animal Diversity Lab 4

Part 1. Sponges & Cnidaria

Sponges are primarily marine organisms and as adults are sessile, filter-feeders. They have a cellular level of organization comprised of specialized cells that perform specific functions. Cells are held loosely together and supported by spicules. They can reproduce asexually by budding but they also release eggs and sperm. Most sponges are poisonous or protected by their spicules, and are rarely eaten by other animals. There are about 10,000 sponge spe- cies.

1. Define multicellular and heterotrophic:

2. Observe the sponge species on display. A. Sketch two: B. Draw the direction water moves into the

sponge.

3. View a prepared slide of a sponge spicule. A. Sketch one spicule at 40X.

B. What is a spicule for?

Cnidarians are radial symmetrical, they have two distinct tissue layers (epidermis and gas- trodermis) separated by a mesoglea and en- closing the gastrovascular cavity that has one opening that functions as both the mouth and the anus. They exist in both the medusa and polyp form. Polyp: cylinders that adhere to the substratum with tentacles extended. Medusa: umbrella-shaped, but free moving. There are about 9,000 cnidarian species.

Name:_______________________________ Section:____

The domain Eukarya (eukary- otes) includes plants, fungi, ani- mals, and many unicellular organ- isms that all share one important trait: the presence of a nucleus in their cells. Today we will focus on the animals (Figure 4 -1). Animals are defined as those eukaryotic organisms that are multicellular and heterotrophic. Bilateral ani- mals with three distinct tissue lay- ers can be further divided into two groups, the deuterostomes and protostomes. When protostomes develop into an embryo they form a mouth first whereas the deuteros- tomes produce the mouth second.

Species: _________________ Species: _________________

Specimen: _________________

Magnification:_______________

Figure 4-1. Phylogenetic tree of some of the major animal groups.

4-2

Biol 1100L Animal Diversity Lab 4

4. Observe a live Hydra using a dissecting scope. A. Sketch:

B. Explain how it moves and what types of tissues must be present to enable it to move?

5. View at 40X a slide of a cnidarian larva. A. Sketch:

B. What is the adaptive significance of mo- tile larvae?

Part 2: Deuterostomes

A. Echinoderms

Sea stars, brittle stars, sand dollars, sea urchins and sea cucumbers make up the echinoderms. All echinoderms live in the marine environment. As adults, most have a water-vascular system tube feet, and an endoskeleton covered by an epidermal layer. They usually have obvious pentaradial symmetry. ~ 6,500 species

6. Observe the echinoderm species on dis- play. A. Sketch two:

B. Drawn dotted lined over sketchs to show pentaradial symmetry.

B. Chordates

The tunicates, lancelets, fishes, amphibians, reptiles, birds, and mammals make up the chordate animals. All of these animals, at some stage of their lives, share the following characters: a notochord, a single, dorsal, tubu- lar nerve cord, and a post-anal tail.

~44,000 species

7. Observe the variety of chordates on display in lab. A. Fill in Table 4-1 with a 1 if a characteris-

tic is present or a 0 if it is not.

B. Label the nodes and fill in the taxa names on Figure 4-2 using Table 4-1. Helpful hint: scales of fish and reptiles are the product of convergent evolu- tion.

Specimen: _________________

Magnification:_______________

Specimen: _________________

Magnification:_______________

Species: _________________ Species: _________________

4-3

Biol 1100L Animal Diversity Lab 4

Part 3: Protostomes

A. Flatworms, Annelids, & Molluscs

Flatworms include both free-living (planarians) or endoparasitic (tapeworms and flukes) spe- cies They are unsegmented and cephalized with bilateral symmetry and incomplete guts. There are about ~ 25,000 species of flatworms and the majority are parasites.

8. Observe the flatworm species on display. A. Label each of the following drawings (A-C) with the flatworm species:

B. How does the morphology of the non- parasitic forms compare to the parasitic forms?

Annelids are the segmented worms and in- clude the leeches and earthworms. They have a closed circulatory system, and a well- developed nervous system. There are about ~ 17,000 species of annelids.