The attend phase of metacognition is where you

As you read in Chapter 4 section 4.4, the centerpiece of the rehearsal phase of metacognition is the strategy card. After decoding tasks and strategizing how to FIT your Learning Patterns to the task, you can use your knowledge of your Learning Patterns to develop personal strategies to direct your efforts. The most efficient way to do this is to develop a personal strategy card.

Strategy cards convert general study skills into personalized strategies for learning based on each learner’s Patterns. Personal strategy cards are essential to effective rehearsal because they help you address the requirements that you have decoded from the assignment and they help you connect to the instructor’s expectations. Strategy cards help you organize your approach to achieving success on the task. They allow you to practice “smarter, not harder.”

You are more effective when you develop a strategy card for each major task or assignment. In doing so, you become more disciplined and you match your efforts to each requirement. In preparation for your reflection assignment that you will complete in Week 5, we will use the Week 5 Final Reflection assignment instructions for the decoding section of this strategy card. This way, next week, you’ll be able to approach your assignment with intention as you skillfully apply your Learning Patterns.

Directions: Your task is to complete your own Personal Strategy Card.

a. Watch the Completing Your Personal Strategy Card video https://youtu.be/fAK3RpNzGg8.

b. You will be filling out the Personal Strategy Card form below to complete the assignment.

EXP 105: Week 4

Personal Strategy Card

Name:

A. LCI Scores

Sequence

Precision

Technical

Reasoning

Confluence

Record your LCI scores in the boxes provided.

31

25

18

22

B. Carefully describe the degree to which you use each of your Learning Patterns.

(Refer to the Personal Learning Profile you developed for your Week Two assignment and any feedback provided by your instructor to determine if you need to refine your responses as you complete this section.)

Sequence:

Precision:

Technical Reasoning:

Confluence:

C. Identify all verbs and specific terms from the assignment instructions and describe how each Learning Pattern will be used to effectively complete the Week 5 assignment.

(Critically review the Final Reflection assignment in Week Five and decode it.)

Sequence:

Precision:

Technical Reasoning:

Confluence:

D. Explain how you will Forge, Intensify, or Tether (FIT) your Learning Patterns to implement personal strategies so you can complete the Week Five assignment efficiently and effectively.

(If you do not need to FIT a Pattern, include a description of the strategies you naturally use which help you to be successful on these types of tasks.)

Sequence:

Precision:

Technical Reasoning:

Confluence:

https://bridgepoint.equella.ecollege.com/curriculum/file/27bf2626-5d1a-4edb-9cf3-d23af28a074f/1/Docicon.png Click to view a Model Personal Strategy Card (tips included!). Many students have found that the instructions in this guide was invaluable for completing the assignment successfully.

· Section A: List your LCI scores in the indicated boxes on the Personal Strategy Card.

· Section B: Carefully describe the degree to which you use each of your Learning Patterns. Refer to the Personal Learning Profile you developed for your Week Two assignment and any feedback provided by your instructor to determine if you need to refine your responses as you complete this section.

· Section C: Critically review the Final Reflection assignment instructions and decode them. Click here to download a copy of the Week 5 Final Reflection instructions (in the online classroom). Identify all verbs and specific terms from the assignment instructions and describe how each Learning Pattern will be used to effectively complete the Week 5 assignment.

· Section D: Explain how you will forge, intensify, or tether (FIT) your Learning Patterns to implement personal strategies so you can complete the Week Five assignment efficiently and effectively. If you do not need to FIT a Pattern, include a description of the strategies you naturally use which help you to be successful on these types of tasks.

c. Save your work and then submit your Word document using Waypoint.

4.4 The Action Phases of Metacognition

What follows is a list of the action phases that your mind goes through as it completes a learning task. The terms (seeFigure 4.2) are words chosen to represent what occurs in each phase.

These are not scientific terms, but instead learner-friendly descriptive words that allow a student to observe andunderstand what is going on in his or her mind. They were chosen to help students respond to the age-old question:"What are you thinking?" and the equally frustrating criticism frequently leveled at them: "You know I can’t read yourmind!"

Phase 1: Mull

Virtually all tasks begin with some form of mulling—meaning you get inside the assignment or the task and seek tounderstand, "What am I being asked to do? Have I ever done this before? What were the results? Do I want to repeatthose results or avoid them?" You don’t start to do anything until you have a sense of where you are going and howyou are going to do it. If the voices of your Patterns are crying out for clearer directions or a greater sense of purpose,then ask for what you need. Don’t let the frustration of not knowing how to start the task escalate from simmeringquestions to boiling anger. Mulling is healthy; boiling isn’t. To avoid reaching that level of frustration, clarify what isexpected of you by decoding the assignment.

Decoding is a learning strategy that helps you mull and connect metacognitively to the instructor’s expectations. Thegoal of decoding is twofold: 1) to identify and clarify the intent of the directions—that is, what the instructor expectsfrom you; and 2) to complete the task in the way your instructor expects it to be done.

A pivotal tool to assist in decoding is a word wall; it is a chart divided into four sectors, with each sector labeled for adifferent Learning Pattern (see Figure 4.3). By using the cue words from the word wall to indicate what Patterns arerequired to complete the task, you can decode assignments, objectives, or any course-related task.

Figure 4.3: Word Wall

Which decoding words do you think will help you decipher assignments the most?

Four differently colored cells filled with words that align with the four Learning Patterns: Sequence, Precision, Technical Reasoning, and Confluence.

Source: © Let Me Learn, Inc.

When you are just beginning to learn how to decode, use a generic word wall. As you become experienced at findingthe cue words in your assignments, add more of them to the word wall. As you take more specialized courses, buildyour own word wall by identifying the key terms associated with each subject and associating them with each of thefour Learning Patterns.

Decoding tasks accurately is the main point of mulling. The steps to decoding are the following:

1. First, read the directions for the task.

2. Next, circle the verbs, specific terms, and titles that are intended to direct you.

3. Then, using the word wall, find the words you circled within the assignment, noting the Learning Pattern that eachword falls under. Go back to the directions, and above each word, write the first letter of the Learning Pattern it isdirecting you to use. See Figure 4.4 for an example.

Figure 4.4: Decoding an Assignment: Critical Thinking

Decoding a task is an efficient way to discern what the task requires.

Example of a decoded assignment. At the top of the figure are the assignment directions, and below the assignment is a decoded version in which particular words are circled and assigned specific Learning Patterns.

Source: © Let Me Learn, Inc.

By breaking down the assignment into the Learning Patterns required, you have a much clearer understanding of whatis expected of you. At least three of the actions to be taken require the use of Precision. Only one requires Sequenceand one requires Technical Reasoning. This assignment calls for no Confluence. That means that the instructor is notasking for your outside-the-box ideas or unique perspective. The instructor wants an accurate description of criticalthinking (Precision) presented in a concise (Technical Reasoning) bulleted list (Sequence). Decoding the task clarifiedhow to proceed and meet the instructor’s expectations.

Now try your hand at decoding the task described in Figure 4.5. Which would you circle as the key action words andspecific terms and titles? Refer to the word wall to find each of your circled words, and determine the letter of theLearning Pattern that should go above the word(s). Remember: All terms and phrases fall under Precision even thoughthey may not be listed specifically under that category.

Figure 4.5: Decoding an Assignment: Transformational Learning Process

The more involved the requirements, the more important it is that you decode the assignment beforestarting.

Example of an assignment and how to decode it. At the top of the worksheet are the assignment directions and below the directions are a decoded version of it.

Source: © Let Me Learn, Inc.

What specific Learning Patterns are going to be required to complete this task? Can you identify when you will need tobe using one Pattern more than another? Knowing the Patterns that you will be called upon to use when completing aspecific task helps you feel more confident about what the instructor’s expectations are for the assignment, and whatyou are being asked to do to complete it.

Dan, Cassie, and Nia all need to learn how to decode their assignments; it will save them valuable time, improve theirlearning outcomes, and increase their grades. Remember Dan’s dilemma? Instead of generating ideas or organizing histhoughts, Dan became fixated on the belief that he had no idea what he was supposed to be doing. Cassie was faringeven worse: She sat in front of her computer rereading the directions for the assignment, trying to guess what theinstructor wanted her to do. Nia didn’t even realize that she needed to take the time to mull and decode theassignment, which required a critical analysis with support from three sources. She simply wrote a paper stating heropinion of the article.

All three used their study time inefficiently and ineffectively because they did not take the time to mull the assignmentand decode it. If they had, they would have saved valuable time and submitted work that matched the expectations ofthe instructor.

Phase 2: Connect

The second action phase of metacognition is the act of mindfully connecting to the assignment. If you have mulled anddecoded the assignment accurately, then you begin to make connections to the requirements of the task. Of coursethere are various types of assignments, but most involve critical reading and critical writing, and each requires that youinteract with text.

Connecting to Your Reading

Using the steps below to guide you, connect your ideas and experiences to the content of an assigned reading(s):

· As you’re reading, think of a similar assignment you’ve had in the past. In your mind, can you begin to comparewhat you are reading now to what you have read in the past?

· Jot down questions that cross your mind. Post your questions and read others’ responses to them.

· Search for relevancy in the assigned reading. "Deep read" the passage, rather than skimming it.

· Anticipate the conclusion of the assigned reading before you complete it. Are you surprised by the outcome?

Understand what you are reading:

· Look for a thread of logic or a progression of thought (e.g., Step 1, Step 2, Step 3).

· Pick out new terminology and look up words you didn’t know.

· Search for the central point; pull it together from different parts of the reading if it is not explicitly stated.

· Consider the reading from several different angles.

Connect to the points in what you are reading by asking yourself:

· Do you feel you were "of like mind" with the author?

· Do the facts speak to you?

· Can you relate your own experiences to its message?

· Do you see any parts of the reading as a jumping off point for your own thinking?

Regardless of the type of assignment, intentional learners use their Learning Patterns to connect to the task, first bymulling and decoding, and next by connecting to it.

Neither Dan, nor Cassie, nor Nia invest in connecting to their assignments. Each allows personal issues, including self-doubt, fear of failure, and lack of personal investment of time, to get in the way of completing the assignmentsuccessfully. None is likely to succeed on current or future assignments if each continues his or her current approach.Conversely, if they allow their Patterns to guide them in connecting fully with the task at hand, they are much morelikely to succeed (Johnston, 2005; Johnston, 2006).

FIT: Forge, Intensify, Tether

A second aspect of connecting to the assignment involves fitting yourself to the task. FIT is an acronym comprised ofthe first letter of the words Forge, Intensify, and Tether. FIT describes the type of self-regulation you need to use inorder to fit your Learning Patterns specifically to the task you are facing. Your goal should be to match the amount ofeach Learning Pattern required of you to the amount of that Pattern you use.

Take for example, the task decoded earlier (see Figure 4.4):

"Write in bulleted form a brief description of critical thinking."

When decoded, you recognize that the task requires you to use Precision (as noted by three different terms, write,define, and critical thinking) first and foremost. Suppose your Precision, at a score of 18, is borderline Avoid/Use asNeeded. In order for you to complete the task successfully, you will need to temporarily increase or forge yourPrecision to fit the task. Once you are conscious of the possible disconnect between the assignment and your LearningPatterns, you can do something about it. Even though you don’t enjoy operating at a high level of Precision, you areable to do so once you recognize what the task calls for and you find a strategy to help you increase your Precision tocomplete the task.

As noted in Figure 4.5, the assignment you decoded requires you to do the following:

Example of an assignment and how to decode it. At the top of the worksheet are the assignment directions and below the directions are a decoded version of it.

Of the 17 key words decoded in this assignment, 12 require the use of Precision. Two require Sequence, and threerequire Technical Reasoning. None requires the use of Confluence. Clearly the assignment requires a great deal ofPrecision and a moderate use of Sequence and Technical Reasoning. But what if your Learning Patterns don’t match theassignment? Do you give up? No, you take action and forge the Pattern until it fits the level of Precision required by theassignment.

Forge

The term forge is intended to be applied to those Patterns that fall between 07 and 17 on the LCI "degree of use"continuum. The purpose of forging a Pattern is to increase the use and performance of it. Forging requires you to workin a way that you would usually prefer not to. However, because you know the Pattern is necessary for the task, youseek to make proper and appropriate use of it. Impossible? No. Does it require your attention and intention?Absolutely! It also requires an increased use of mental energy.

The amount of mental energy needed to alter your natural level of performance in a Pattern is directly related to thedegree you are required to use it. For example, Dan avoids Confluence (14). He is not a risk-taker, and this assignmentis asking him to do something he has never done before. In addition, he almost avoids Precision (18). Therefore, whenhe is required to "write, describe, and explain" a specific term, his tendency to avoid Precision has him feeling stressedand filled with doubt about his writing ability. Consequently, he needs to use a significant amount of energy to intensify(energize) his Precision and forge (increase) his Confluence in order to free himself to take on the assignment andbelieve he can achieve.

Cassie, too, has a Pattern she avoids: Technical Reasoning (10). It is not easy for Cassie to problem-solve. By notknowing how to use her Technical Reasoning to ground her Precision (29) and make it work for her, she allows hermind to go round and round in circles, never certain of what to do or how to proceed. Her Technical Reasoning couldprove helpful to her in completing the assignment if she knew how to put forth the mental energy to forge its use. Forexample, she could use her Sequence to plan a step-by-step approach to forging her Technical Reasoning and solve theproblem she is facing.

Forging is a metacognitive skill that takes patience, practice, and determination. Forging a Pattern is a challenge. Thesame is not the case if you use a Pattern at the Use as Needed level. Then increasing the use of it requires only thatyou intensify it.

Intensify

The term intensify is intended to be used with the Patterns that you Use as Needed. U