Design a Logical Topology with the following constraints: Material Constraints: 2x 24-Port, Layer 3 Network Switches 1x Edge Router (connected out to the local LAN, the external RV215W LAN, and the WAN - 3 total connections) 2x Wireless Access Points 1x Cisco RV215W (connected to the edge router to allow LAN communication from another building) 30 total network devices (these will determine your total subnets/VLANs and subnet scopes): 10 VoIP phones 4 Executive computers 2 Administration computers 2 Finance computers 3 Printers 2 IT computers 2 Servers 5 network transport devices (listed above) The Cisco RV215W Logical Topology: 1. Use the image-editing tool of choice (a picture of pen-and-paper is fine) 2. Create a logical topology of the network you described above 3. Remember: Physical location is irrelevant in a logical topology, only how our devices are connected (VLAN's, Subnets, connection types, etc.) need to be included. 4. You need to include the following in your topology: All device IP addresses All port numbers used (most important on switches and routers) Give all devices appropriate host names (excluding the VoIP phones)
Task 2. Create a subnet scheme based upon the above functions and devices per function.
**(Use a Private Class C: 192.168.100.x)**
Document your subnet scheme as a list containing the Department/Function name, Net ID, host range, and Broadcast ID for each.
Don't forget to allocate an additional 192.168.x.x /30 for your router-to-router (Edge Router to RV215W) connection and identify that in your list. T