Zeitoun part 2 summary

SAFE OPERATING PROCEDURE:GENERICD:\116100084.docPage 1of 3SOP No:Issue No: LOCATION DETAILSSchool/Branch: TASK/ACTIVITYDate: PREPARED BYName, Position and Signature (insert names of the supervisor, HSR, HSO and operator involved)NamePositionSignatureHAZARD IDENTIFICATION: See Risk Assessment dated / /RISK ASSESSMENT SAFE OPERATING PROCEDURE DETAILSSTOPDO NOT OPERATE PLANTIF YOU HAVE NOT COMPLETED (1) THE COMPULSORY UNIVERSITY OF ADELAIDE OCCUPATIONAL HEALTH AND SAFETY INDUCTION COURSE, AND; (2) DO NOT POSSESS THE REQUISITE QUALIFICATIONS OR TRAINING FOR THIS PIECE OF PLANT.Preparation –work area check:Ready access to and egress from the machinery (min of 600mm clearance required)Area is free from grease, oil, debris and objects, which can be tripped over. (Usediatomaceous earth (“kitty litter”) or absorption pillow to soak up grease, coolant, oil and other fluids)Area is clear of unauthorised people before commencing work.Personal Attire & Safety Equipment:Approved closed toe type shoes must be worn at all times.Approved safety spectacles/goggles must be worn at all times, where required.Clothing must be tight fitting.Long hair must be confined close to the head by an appropriate restraint.Finger rings and exposed loose jewellery (eg bracelets and necklaces) must not be worn. Medic Alert bracelet must be taped if exposed.Gloves must not be worn when operating machine, excepting where specifying otherwise.Operation Of Emergency Stop Button:Switch lights and power on at their respective main switches, where required.Start machine using the Start Button. Check that the Emergency Stop Button is working.Check that the Drive Belt Cover Guard interlock Emergency Stop micro-switch is working.Release the Emergency Stop button in preparation for next machineuse.
SAFE OPERATING PROCEDURE:GENERICD:\116100084.docPage 2of 3SOP No:Issue No: Machine Pre-operational Safety Checks –Safety Precautions that MUST be Observed:Visual inspection of machine to verify it is in good operational order, ensuring no damage to any stationary or moving parts, electrical cords etc. Any unsafe equipment is to be reported to an authorised staff member and tagged out.Ensure lighting and power are switched on their respective main switches, where required.Be aware of other activities happening in the immediate area.Ensure that no slip and/or trip hazards are present.Ensure that machine lighting is adequate.Start machine using the Start Button.Check that the Emergency Stop is working.Check that all machine guards, electrical interlocks and Emergency Stop micro-switch are correctly positioned, locked in place and in proper working condition.IF IN DOUBT, ASK[Optional][Insert additional plant and equipment specific clauses as required]IF IN DOUBT, ASK [Optional]Locate and be familiar with the operation of the ON/OFF starter switch.Locate and befamiliar with the operation of the Emergency Stop button. Check Emergency Stop button is working.Wear appropriate PPE for task being performed (i.e. safety glasses. Gloves required when cleaning).Operation:Ensure light and power is switched on at their respective switches.[Insert additional plant and equipment specific clauses as required]NEVER LEAVE [---insert identifying title of machine---] RUNNING WHILST UNATTENDED.[Insert additional plant and equipment specific clauses as required]Returnexcess stock material to metal storage area.Clean up machine and surrounding area.