Packet sniffing and spoofing lab report

Local DNS Attack Lab

SEED Labs – Local DNS Attack Lab 1

Local DNS Attack Lab

Copyright © 2018 Wenliang Du, Syracuse University. The development of this document was partially funded by the National Science Foundation under Award No. 1303306 and 1718086. This work is licensed under a Creative Commons Attribution-NonCommercial- ShareAlike 4.0 International License. A human-readable summary of (and not a substitute for) the license is the following: You are free to copy and redistribute the material in any medium or format. You must give appropriate credit. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. You may not use the material for commercial purposes.

1 Lab Overview

DNS (Domain Name System) is the Internet’s phone book; it translates hostnames to IP addresses (and vice versa). This translation is through DNS resolution, which happens behind the scene. DNS attacks manip- ulate this resolution process in various ways, with an intent to misdirect users to alternative destinations, which are often malicious. The objective of this lab is to understand how such attacks work. Students will first set up and configure a DNS server, and then they will try various DNS attacks on the target that is also within the lab environment.

The difficulties of attacking local victims versus remote DNS servers are quite different. Therefore, we have developed two labs, one focusing on local DNS attacks, and the other on remote DNS attack. This lab focuses on local attacks. This lab covers the following topics:

• DNS and how it works • DNS server setup • DNS cache poisoning attack • Spoofing DNS responses • Packet sniffing and spoofing • The Scapy tool

Readings. Detailed coverage of the DNS attacks can be found in Chapter 15 of the SEED book, Computer Security: A Hands-on Approach, by Wenliang Du.

Lab environment. This lab has been tested on our pre-built Ubuntu 16.04 VM, which can be downloaded from the SEED website.

2 Lab Tasks (Part I): Setting Up a Local DNS Server

The main purpose of this lab is on DNS attacks, and our attacking target is a local DNS server. Obviously, it is illegal to attack a real machine, so we need to set up our own DNS server to conduct the attack experiments. The lab environment needs three separate machines: one for the victim, one for the DNS server, and the other for the attacker. We will run these three virtual machines on one physical machine. All these VMs will run our pre-built Ubuntu VM image. Figure 1 illustrates the setup of the experiment environment. For the VM network setting, if you are using VirtualBox, please use "NAT Network" as the network adapter for each VM. If you are using Vmware, the default "NAT" setting is good enough.

For the sake of simplicity, we put all these VMs on the same network. In the following sections, we assume that the user machine’s IP address is 10.0.2.18, the DNS Server’s IP is 10.0.2.16 and the

SEED Labs – Local DNS Attack Lab 2

attacker machine’s IP is 10.0.2.17. We need to configure the user machine and the local DNS server; for the attacker machine, the default setup in the VM should be sufficient.

Local DNS Server 10.0.2.16

User Machine 10.0.2.18

Attacker 10.0.2.17

Figure 1: Environment setup for the experiment

2.1 Task 1: Configure the User Machine

On the user machine 10.0.2.18, we need to use 10.0.2.16 as the local DNS server (by default, the DNS server program is already running in the SEED VM). This is achieved by changing the resolver con- figuration file (/etc/resolv.conf) of the user machine, so the server 10.0.2.16 is added as the first nameserver entry in the file, i.e., this server will be used as the primary DNS server. Unfortunately, our provided VM uses the Dynamic Host Configuration Protocol (DHCP) to obtain network configuration pa- rameters, such as IP address, local DNS server, etc. DHCP clients will overwrite the /etc/resolv.conf file with the information provided by the DHCP server.

One way to get our information into /etc/resolv.conf without worrying about the DHCP is to add the following entry to the /etc/resolvconf/resolv.conf.d/head file:

Add the following entry to /etc/resolvconf/resolv.conf.d/head nameserver 10.0.2.16

Run the following command for the change to take effect $ sudo resolvconf -u

The content of the head file will be prepended to the dynamically generated resolver configuration file. Normally, this is just a comment line (the comment in /etc/resolv.conf comes from this head file).

After you finish configuring the user machine, use the dig command to get an IP address from a host- name of your choice. From the response, please provide evidences to show that the response is indeed from your server. If you cannot find the evidence, your setup is not successful.

2.2 Task 2: Set up a Local DNS Server

For the local DNS server, we need to run a DNS server program. The most widely used DNS server software is called BIND (Berkeley Internet Name Domain), which, as the name suggests, was originally designed at the University of California Berkeley in the early 1980s. The latest version of BIND is BIND 9, which was

SEED Labs – Local DNS Attack Lab 3

first released in 2000. We will show how to configure BIND 9 for our lab environment. The BIND 9 server program is already installed in our pre-built Ubuntu VM image.

Step 1: Configure the BIND 9 server. BIND 9 gets its configuration from a file called /etc/bind/ named.conf. This file is the primary configuration file, and it usually contains several "include" entries, i.e., the actual configurations are stored in those included files. One of the included files is called /etc/bind/named.conf.options. This is where we typically set up the configuration options. Let us first set up an option related to DNS cache by adding a dump-file entry to the options block:

options { dump-file "/var/cache/bind/dump.db";

};

The above option specifies where the cache content should be dumped to if BIND is asked to dump its cache. If this option is not specified, BIND dumps the cache to a default file called /var/cache/bind/ named_dump.db. The two commands shown below are related to DNS cache. The first command dumps the content of the cache to the file specified above, and the second command clears the cache.

$ sudo rndc dumpdb -cache // Dump the cache to the sepcified file $ sudo rndc flush // Flush the DNS cache

Step 2: Turn off DNSSEC. DNSSEC is introduced to protect against spoofing attacks on DNS servers. To show how attacks work without this protection mechanism, we need to turn the protection off. This is done by modifying the named.conf.options file: comment out the dnssec-validation entry, and add a dnssec-enable entry.

options { # dnssec-validation auto; dnssec-enable no;

};

Step 3: Start DNS server. We can now start the DNS server using the following command. Every time a modification is made to the DNS configuration, the DNS server needs to be restarted. The following command will start or restart the BIND 9 DNS server.

$ sudo service bind9 restart

Step 4: Use the DNS server. Now, go back to your user machine, and ping a computer such as www. google.com and www.facebook.com, and describe your observation. Please use Wireshark to show the DNS query triggered by your ping command. Please also indicate when the DNS cache is used.

2.3 Task 3: Host a Zone in the Local DNS Server

Assume that we own a domain, we will be responsible for providing the definitive answer regarding this domain. We will use our local DNS server as the authoritative nameserver for the domain. In this lab, we will set up an authoritative server for the example.com domain. This domain name is reserved for use in documentation, and is not owned by anybody, so it is safe to use it.

SEED Labs – Local DNS Attack Lab 4

Step 1: Create zones. We need to create two zone entries in the DNS server by adding the following contents to /etc/bind/named.conf. The first zone is for forward lookup (from hostname to IP), and the second zone is for reverse lookup (from IP to hostname). It should be noted that the example.com domain name is reserved for use in documentation, and is not owned by anybody, so it is safe to use it.

zone "example.com" { type master; file "/etc/bind/example.com.db";

};

zone "0.168.192.in-addr.arpa" { type master; file "/etc/bind/192.168.0.db";

};

Step 2: Setup the forward lookup zone file. The file name after the file keyword in the above zone definition is called the zone file, and this is where the actual DNS resolution is stored. In the /etc/bind/ directory, create the following example.com.db zone file. Readers who are interested in the syntax of the zone file, can refer to RFC 1035 for details.

$TTL 3D ; default expiration time of all resource records without : their own TTL

@ IN SOA ns.example.com. admin.example.com. ( 1 ; Serial 8H ; Refresh 2H ; Retry 4W ; Expire 1D ) ; Minimum

@ IN NS ns.example.com. ;Address of nameserver @ IN MX 10 mail.example.com. ;Primary Mail Exchanger

www IN A 192.168.0.101 ;Address of www.example.com mail IN A 192.168.0.102 ;Address of mail.example.com ns IN A 192.168.0.10 ;Address of ns.example.com

*.example.com. IN A 192.168.0.100 ;Address for other URL in ; the example.com domain

The symbol ‘@’ is a special notation representing the origin specified in named.conf (the string after "zone"). Therefore, ‘@’ here stands for example.com. This zone file contains 7 resource records (RRs), including a SOA (Start Of Authority) RR, a NS (Name Server) RR, a MX (Mail eXchanger) RR, and 4 A (host Address) RRs.

Step 3: Set up the reverse lookup zone file. To support DNS reverse lookup, i.e., from IP address to hostname, we also need to set up the DNS reverse lookup file. In the /etc/bind/ directory, create the following reverse DNS lookup file called 192.168.0.db for the example.net domain:

$TTL 3D @ IN SOA ns.example.com. admin.example.com. (

1

SEED Labs – Local DNS Attack Lab 5

User Machine

Example.com

ROOT

Malicious.com

DNS Cache

.COM

1 2

3

4

Local DNS Server

DNS CacheLocal DNS Files

Figure 2: DNS Attack Surfaces

8H 2H 4W 1D)

@ IN NS ns.example.com.

101 IN PTR www.example.com. 102 IN PTR mail.example.com. 10 IN PTR ns.example.com.

Step 4: Restart the BIND server and test. When all the changes are made, remember to restart the BIND server. Now, go back to the user machine, and ask the local DNS server for the IP address of www. example.com using the dig command. Please describe and explain your observations.

3 Lab Tasks (Part II): Attacks on DNS

The main objective of DNS attacks on a user is to redirect the user to another machine B when the user tries to get to machine A using A’s host name. For example, when the user tries to access the online banking, if the adversaries can redirect the user to a malicious web site that looks very much like the main web site of bank, the user might be fooled and give away password of his/her online banking account.

When a user types in http://www.example.net in his/her browsers, the user’s machine will issue a DNS query to find out the IP address of this web site. Attackers’ goal is to fool the user’s machine with a faked DNS reply, which resolves the hostname to a malicious IP address. There are several ways to launch such a DNS attack. See Figure 2 for the illustration of the attack surface and read Chapter 15 of the SEED book for detailed analysis of the attack surface.

We will launch a series DNS attacks on the example.net domain. It should be noted that we are using example.net as our target domain, not the example.com. The latter one is already hosted by our own local DNS server in the setup, so no DNS query will be sent out for hostnames in that domain.

SEED Labs – Local DNS Attack Lab 6

3.1 Task 4: Modifying the Host File

The host name and IP address pairs in the HOSTS file (/etc/hosts) are used for local lookup; they take the preference over remote DNS lookups. For example, if there is a following entry in the HOSTS file in the user’s computer, the www.example.com will be resolved as 1.2.3.4 in user’s computer without asking any DNS server:

1.2.3.4 www.example.net

If attackers have compromised a user’s machine, they can modify the HOSTS file to redirect the user to a malicious site whenever the user tries to access www.example.com. Assume that you have already compromised a machine, please try this technique to redirect www.bank32.com to any IP address that you choose.

It should be noted that /etc/hosts is ignored by the dig command, but will take effect on the ping command and web browser etc. Compare the results obtained before and after the attack.

3.2 Task 5: Directly Spoofing Response to User

In this attack, the victim’s machine has not been compromised, so attackers cannot directly change the DNS query process on the victim’s machine. However, if attackers are on the same local area network as the victim, they can still achieve a great damage.

Attacker

Local DNS Server

LAN

Global DNS servers on the Internet

Attacker

DNS QueryDNS Query

User Machines

Figure 3: Local DNS Poisoning Attack

When a user types the name of a web site (a host name, such as www.example.net) in a web browser, the user’s computer will issue a DNS request to the DNS server to resolve the IP address of the host name. After hearing this DNS request, the attackers can spoof a fake DNS response (see Figure 3). The fake DNS response will be accepted by the user’s computer if it meets the following criteria:

1. The source IP address must match the IP address of the DNS server.

2. The destination IP address must match the IP address of the user’s machine.

3. The source port number (UDP port) must match the port number that the DNS request was sent to (usually port 53).

SEED Labs – Local DNS Attack Lab 7

4. The destination port number must match the port number that the DNS request was sent from.

5. The UDP checksum must be correctly calculated.

6. The transaction ID must match the transaction ID in the DNS request.

7. The domain name in the question section of the reply must match the domain name in the question section of the request.

8. The domain name in the answer section must match the domain name in the question section of the DNS request.

9. The User’s computer must receive the attacker’s DNS reply before it receives the legitimate DNS response.

To satisfy the criteria 1 to 8, the attackers can sniff the DNS request message sent by the victim; they can then create a fake DNS response, and send back to the victim, before the real DNS server does. Netwox tool 105 provide a utility to conduct such sniffing and responding. We can make up any arbitrary DNS answer in the reply packets. Moreover, we can use the “filter” field to specify what kind of packets to sniff. For example, by using "src host 10.0.2.18", we can limit the scope of our sniffing to packets only from host 10.0.2.18. The manual of the tool is described in the following:

Listing 1: The usage of the Netwox Tool 105 Title: Sniff and send DNS answers

Usage: netwox 105 -h data -H ip -a data -A ip [-d device] [-T uint32] [-f filter] [-s spoofip]

Parameters: -h|--hostname data hostname -H|--hostnameip ip IP address -a|--authns data authoritative nameserver -A|--authnsip ip authns IP -d|--device device device name -T|--ttl uint32 ttl in seconds -f|--filter filter pcap filter -s|--spoofip spoofip IP spoof initialization type

While the attack program is running, on the user machine, you can run dig command on behalf of the user. This command triggers the user machine to send out a DNS query to the local DNS server, which will eventually send out a DNS query to the authoritative nameserver of the example.net domain (if the cache does not contain the answer). If your attack is successful, you should be able to see your spoofed information in the reply. Compare your results obtained before and after the attack.

3.3 Task 6: DNS Cache Poisoning Attack

The above attack targets the user’s machine. In order to achieve long-lasting effect, every time the user’s machine sends out a DNS query for www.example.net the attacker’s machine must send out a spoofed DNS response. This might not be so efficient; there is a much better way to conduct attacks by targeting the DNS server, instead of the user’s machine.

When a DNS server Apollo receives a query, if the host name is not within the Apollo’s domain, it will ask other DNS servers to get the host name resolved. Note that in our lab setup, the domain of our DNS server is example.com; therefore, for the DNS queries of other domains (e.g. example.net), the DNS

SEED Labs – Local DNS Attack Lab 8

server Apollo will ask other DNS servers. However, before Apollo asks other DNS servers, it first looks for the answer from its own cache; if the answer is there, the DNS server Apollo will simply reply with the information from its cache. If the answer is not in the cache, the DNS server will try to get the answer from other DNS servers. When Apollo gets the answer, it will store the answer in the cache, so next time, there is no need to ask other DNS servers. See Figure 3.

Therefore, if attackers can spoof the response from other DNS servers, Apollo will keep the spoofed response in its cache for certain period of time. Next time, when a user’s machine wants to resolve the same host name, Apollo will use the spoofed response in the cache to reply. This way, attackers only need to spoof once, and the impact will last until the cached information expires. This attack is called DNS cache poisoning.

We can use the same tool (Netwox 105) for this attack. Before attacking, make sure that the DNS Server’s cache is empty. You can flush the cache using the following command:

$ sudo rndc flush

The difference between this attack and the previous attack is that we are spoofing the response to DNS server now, so we set the filter field to "src host 192.168.0.10", which is the IP address of the DNS server. We also use the ttl field (time-to-live) to indicate how long we want the fake answer to stay in the DNS server’s cache. After the DNS server is poisoned, we can stop the Netwox 105 program. If we set ttl to 600 (seconds), then DNS server will keep giving out the fake answer for the next 10 minutes.

Note: Please select the raw in the spoofip field; otherwise, Netwox 105 will try to also spoof the MAC address for the spoofed IP address. To get the MAC address, the tool sends out an ARP request, asking for the MAC address of the spoofed IP. This spoofed IP address is usually the IP address of an external DNS server, which is not on the same LAN. Therefore, nobody will reply the ARP request. The tool will wait for the ARP reply for a while before going ahead without the MAC address. The waiting will delay the tool from sending out the spoofed response. If the actual DNS response comes earlier than the spoofed response, the attack will fail. That’s why you need to ask the tool not to spoof the MAC address.

You can tell whether the DNS server is poisoned or not by observing the DNS traffic using Wireshark when you run the dig command on the target hostname. You should also dumping the local DNS server’s cache to check whether the spoofed reply is cached or not. To dump and view the DNS server’s cache, issue the following command:

$ sudo rndc dumpdb -cache $ sudo cat /var/cache/bind/dump.db

3.4 Task 7: DNS Cache Poisoning: Targeting the Authority Section

In the previous task, our DNS cache poisoning attack only affects one hostname, i.e., www.example.net. If users try to get the IP address of another hostname, such as mail.example.net, we need to launch the attack again. It will be more efficient if we launch one attack that can affect the entire example.net domain.

The idea is to use the Authority section in DNS replies. Basically, when we spoofed a reply, in addition to spoofing the answer (in the Answer section), we add the following in the Authority section. When this entry is cached by the local DNS server, ns.attacker32.com will be used as the nameserver for future queries of any hostname in the example.net domain. Since attacker32.com is a machine controlled by attackers, it can provide a forged answer for any query.

;; AUTHORITY SECTION: example.net. 259200 IN NS attacker32.com.

SEED Labs – Local DNS Attack Lab 9

The purpose of this task is to conduct such as an attack. You need to demonstrate that you can get the above entry cached by the local DNS server. After the cache is poisoned, run a dig command on any hostname in the example.net domain, and use Wireshark to observe where the DNS query goes. It should be noted that the attacker32.com is owned by Wenliang Du, the author of the SEED labs, but this machine is not set up to serve as a DNS server. Therefore, you will not be able to get a answer from it, but your Wireshark traffic should be able to tell you whether your attack is successful or not.

You need to use Scapy for this task. See the Guideline section for a sample code.

3.5 Task 8: Targeting Another Domain

In the previous attack, we successfully poison the cache of the local DNS server, so attacker32.com becomes the nameserver for the example.com domain. Inspired by this success, we would like to extend its impact to other domain. Namely, in the spoofed response triggered by a query for www.example.net, we would like to add additional entry in the Authority section (see the following), so attacker32.com is also used as the nameserver for google.com.

;; AUTHORITY SECTION: example.net. 259200 IN NS attacker32.com. google.com. 259200 IN NS attacker32.com.

Please use Scapy to launch such an attack on your local DNS server; describe and explain your observa- tion. It should be noted that the query that we are attacking is still the query to example.net, not one to google.com.

3.6 Task 9: Targeting the Additional Section

In DNS replies, there is section called Additional Section, which is used to provide additional information. In practice, it is mainly used to provide IP addresses for some hostnames, especially for those appearing in the Authority section. The goal of this task is to spoof some entries in this section and see whether they will be successfully cached by the target local DNS server. In particular, when responding to the query for www.example.net, we add the following entries in the spoofed reply, in addition to the entries in the Answer section:

;; AUTHORITY SECTION: example.net. 259200 IN NS attacker32.com. example.net. 259200 IN NS ns.example.net.

;; ADDITIONAL SECTION: attacker32.com. 259200 IN A 1.2.3.4 À ns.example.net. 259200 IN A 5.6.7.8 Á www.facebook.com. 259200 IN A 3.4.5.6 Â

Entries À and Á are related to the hostnames in the Authority section. Entry  is completely irrelevant to any entry in the reply, but it provides a “gracious” help to users, so they do not need to look up for the IP address of Facebook. Please use Scapy to spoof such a DNS reply. Your job is to report what entries will be successfully cached, and what entries will not be cached; please explain why.

3.7 What’s Next

In the DNS cache poisoning attack of this lab, we assume that the attacker and the DNS server are on the same LAN, i.e., the attacker can observe the DNS query message. When the attacker and the DNS server

SEED Labs – Local DNS Attack Lab 10

are not on the same LAN, the cache poisoning attack becomes much more challenging. If you are interested in taking on such a challenge, you can try our “Remote DNS Attack Lab”.

4 Guideline

You need to use Scapy for several tasks in this lab. The following sample code shows how to sniff a DNS query and then spoof a DNS reply, which contains a record in the Answer section, two records in the Authority section and two records in the Additional section.

#!/usr/bin/python from scapy.all import *

def spoof_dns(pkt): if (DNS in pkt and ’www.example.net’ in pkt[DNS].qd.qname):

# Swap the source and destination IP address IPpkt = IP(dst=pkt[IP].src, src=pkt[IP].dst)

# Swap the source and destination port number UDPpkt = UDP(dport=pkt[UDP].sport, sport=53)

# The Answer Section Anssec = DNSRR(rrname=pkt[DNS].qd.qname, type=’A’,

ttl=259200, rdata=’10.0.2.5’)

# The Authority Section NSsec1 = DNSRR(rrname=’example.net’, type=’NS’,

ttl=259200, rdata=’ns1.example.net’) NSsec2 = DNSRR(rrname=’example.net’, type=’NS’,

ttl=259200, rdata=’ns2.example.net’)

# The Additional Section Addsec1 = DNSRR(rrname=’ns1.example.net’, type=’A’,

ttl=259200, rdata=’1.2.3.4’) Addsec2 = DNSRR(rrname=’ns2.example.net’, type=’A’,

ttl=259200, rdata=’5.6.7.8’)

# Construct the DNS packet DNSpkt = DNS(id=pkt[DNS].id, qd=pkt[DNS].qd, aa=1, rd=0, qr=1, À

qdcount=1, ancount=1, nscount=2, arcount=2, an=Anssec, ns=NSsec1/NSsec2, ar=Addsec1/Addsec2)

# Construct the entire IP packet and send it out spoofpkt = IPpkt/UDPpkt/DNSpkt send(spoofpkt)

# Sniff UDP query packets and invoke spoof_dns(). pkt = sniff(filter=’udp and dst port 53’, prn=spoof_dns)

Line À constructs the DNS payload, including DNS header and data. Each field of the DNS payload is explained in the following:

• id: Transaction ID; should be the same as that in the request.

SEED Labs – Local DNS Attack Lab 11

• qd: Query Domain; should be the same as that in the Request. • aa: Authoritative answer (1 means that the answer contains Authoritative answer). • rd: Recursion Desired (0 means to disable Recursive queries). • qr: Query Response bit (1 means Response). • qdcount: number of query domains. • ancount: number of records in the Answer section. • nscount: number of records in the Authority section. • arcount: number of records in the Additional section. • an: Answer section • ns: Authority section • ar: Additional section

5 Submission

Students need to submit a detailed lab report to describe what they have done, what they have observed, and how they interpret the results. Reports should include evidences to support the observations. Evidences include packet traces, screendumps, etc. Reports should also list the important code snippets with explana- tions. Simply attaching code without any explanation will not receive credits.