A study conducted at manatee community college

For Eng.Kelvin Only

CHAPTER 1

The Nature of Probability and Statistics

Objectives

After completing this chapter, you should be able to

1 Demonstrate knowledge of statistical terms.

2 Differentiate between the two branches of statistics.

3 Identify types of data.

4 Identify the measurement level for each variable.

5 Identify the four basic sampling techniques.

6 Explain the difference between an observational and an experimental study.

7 Explain how statistics can be used and misused.

8 Explain the importance of computers and calculators in statistics.

Outline

Introduction

1–1Descriptive and Inferential Statistics

1–2Variables and Types of Data

1–3Data Collection and Sampling Techniques

1–4Observational and Experimental Studies

1–5Uses and Misuses of Statistics

1–6Computers and Calculators

Summary

Page 2

Statistics Today

Are We Improving Our Diet?

It has been determined that diets rich in fruits and vegetables are associated with a lower risk of chronic diseases such as cancer. Nutritionists recommend that Americans consume five or more servings of fruits and vegetables each day. Several researchers from the Division of Nutrition, the National Center for Chronic Disease Control and Prevention, the National Cancer Institute, and the National Institutes of Health decided to use statistical procedures to see how much progress is being made toward this goal.

The procedures they used and the results of the study will be explained in this chapter. See Statistics Today—Revisited at the end of this chapter.

Introduction

You may be familiar with probability and statistics through radio, television, newspapers, and magazines. For example, you may have read statements like the following found in newspapers.

•In Massachusetts, 36% of adults aged 25 and older have at least a bachelor’s degree. (Source: U.S. Census Bureau.)

•In 1995 there were 926,621 bankruptcy filings, while in 2005 there were 2,078,415 bankruptcy filings. (Source: Administrative Office of the U.S. Courts, Washington, D.C.)

•Toddlers need an average of 13 hours of sleep per day.

•The average in-state college tuition and fees for 4-year public college is $5836. (Source: The College Board.)

•There is a 3.8% probability of selecting a briefcase containing $1 million on the television show “Deal or No Deal.”

•The back-to-school student plans to spend, on average, $114.38 on electronics and computer-related items. (Source: National Retail Federation.)

Unusual Stat

Of people in the United States, 14% said that they feel happiest in June, and 14% said that they feel happiest in December.

Statistics is used in almost all fields of human endeavor. In sports, for example, a statistician may keep records of the number of yards a running back gains during a football game, or the number of hits a baseball player gets in a season. In other areas, such as public health, an administrator might be concerned with the number of residents who contract a new strain of flu virus during a certain year. In education, a researcher might want to know if new methods of teaching are better than old ones. These are only a few examples of how statistics can be used in various occupations.

Page 3

Interesting Fact

Every day in the United States about 120 golfers claim that they made a hole-in-one.

Furthermore, statistics is used to analyze the results of surveys and as a tool in scientific research to make decisions based on controlled experiments. Other uses of statistics include operations research, quality control, estimation, and prediction.

Statistics is the science of conducting studies to collect, organize, summarize, analyze, and draw conclusions from data.

Students study statistics for several reasons:

1.Like professional people, you must be able to read and understand the various statistical studies performed in your fields. To have this understanding, you must be knowledgeable about the vocabulary, symbols, concepts, and statistical procedures used in these studies.

2.You may be called on to conduct research in your field, since statistical procedures are basic to research. To accomplish this, you must be able to design experiments; collect, organize, analyze, and summarize data; and possibly make reliable predictions or forecasts for future use. You must also be able to communicate the results of the study in your own words.

3.You can also use the knowledge gained from studying statistics to become better consumers and citizens. For example, you can make intelligent decisions about what products to purchase based on consumer studies, about government spending based on utilization studies, and so on.

These reasons can be considered the goals for studying statistics.

It is the purpose of this chapter to introduce the goals for studying statistics by answering questions such as the following:

What are the branches of statistics?

What are data?

How are samples selected?

Objective 1

Demonstrate knowledge of statistical terms.

1–1Descriptive and Inferential Statistics

To gain knowledge about seemingly haphazard situations, statisticians collect information for variables , which describe the situation.

A variable is a characteristic or attribute that can assume different values.

Data are the values (measurements or observations) that the variables can assume. Variables whose values are determined by chance are called random variables.

Suppose that an insurance company studies its records over the past several years and determines that, on average, 3 out of every 100 automobiles the company insured were involved in accidents during a 1-year period. Although there is no way to predict the specific automobiles that will be involved in an accident (random occurrence), the company can adjust its rates accordingly, since the company knows the general pattern over the long run. (That is, on average, 3% of the insured automobiles will be involved in an accident each year.)

Objective 2

Differentiate between the two branches of statistics.

A collection of data values forms a data set. Each value in the data set is called a data value or a datum.

Page 4

Data can be used in different ways. The body of knowledge called statistics is sometimes divided into two main areas, depending on how data are used. The two areas are

1.Descriptive statistics

2.Inferential statistics

Descriptive statistics consists of the collection, organization, summarization, and presentation of data.

In descriptive statistics the statistician tries to describe a situation. Consider the national census conducted by the U.S. government every 10 years. Results of this census give you the average age, income, and other characteristics of the U.S. population. To obtain this information, the Census Bureau must have some means to collect relevant data. Once data are collected, the bureau must organize and summarize them. Finally, the bureau needs a means of presenting the data in some meaningful form, such as charts, graphs, or tables.

The second area of statistics is called inferential statistics .

Inferential statistics consists of generalizing from samples to populations, performing estimations and hypothesis tests, determining relationships among variables, and making predictions.

Historical Note

The origin of descriptive statistics can be traced to data collection methods used in censuses taken by the Babylonians and Egyptians between 4500 and 3000 B.C. In addition, the Roman Emperor Augustus (27 B.C–A.D. 17) conducted surveys on births and deaths of the citizens of the empire, as well as the number of livestock each owned and the crops each citizen harvested yearly.

Here, the statistician tries to make inferences from samples to populations. Inferential statistics uses probability, i.e., the chance of an event occurring. You may be familiar with the concepts of probability through various forms of gambling. If you play cards, dice, bingo, and lotteries, you win or lose according to the laws of probability. Probability theory is also used in the insurance industry and other areas.

It is important to distinguish between a sample and a population.

A population consists of all subjects (human or otherwise) that are being studied.

Unusual Stat

Twenty-nine percent of Americans want their boss’s job.

Most of the time, due to the expense, time, size of population, medical concerns, etc., it is not possible to use the entire population for a statistical study; therefore, researchers use samples.

A sample is a group of subjects selected from a population.

Historical Note

Inferential statistics originated in the 1600s, when John Graunt published his book on population growth, Natural and Political Observations Made upon the Bills of Mortality. About the same time, another mathematician/astronomer, Edmund Halley, published the first complete mortality tables. (Insurance companies use mortality tables to determine life insurance rates.)

If the subjects of a sample are properly selected, most of the time they should possess the same or similar characteristics as the subjects in the population. The techniques used to properly select a sample will be explained in Section 1–3.

An area of inferential statistics called hypothesis testing is a decision-making process for evaluating claims about a population, based on information obtained from samples. For example, a researcher may wish to know if a new drug will reduce the number of heart attacks in men over 70 years of age. For this study, two groups of men over 70 would be selected. One group would be given the drug, and the other would be given a placebo (a substance with no medical benefits or harm). Later, the number of heart attacks occurring in each group of men would be counted, a statistical test would be run, and a decision would be made about the effectiveness of the drug.

Statisticians also use statistics to determine relationships among variables. For example, relationships were the focus of the most noted study in the 20th century, “Smoking and Health,” published by the Surgeon General of the United States in 1964. He stated that after reviewing and evaluating the data, his group found a definite relationship between smoking and lung cancer. He did not say that cigarette smoking actually causes lung cancer, but that there is a relationship between smoking and lung cancer. This conclusion was based on a study done in 1958 by Hammond and Horn. In this study, 187,783 men were observed over a period of 45 months. The death rate from lung cancer in this group of volunteers was 10 times as great for smokers as for nonsmokers.

Finally, by studying past and present data and conditions, statisticians try to make predictions based on this information. For example, a car dealer may look at past sales records for a specific month to decide what types of automobiles and how many of each type to order for that month next year.

Page 5

Speaking of Statistics

Statistics and the New Planet

In the summer of 2005, astronomers announced the discovery of a new planet in our solar system. This planet, as of this writing, has not yet been named; however, astronomers have dubbed it Xena. They also discovered that it has a moon that is larger than Pluto.1 Xena is about 9 billion miles from the Sun. (Some sources say 10 billion.) Its diameter is about 4200 miles. Its surface temperature has been estimated at –400°F, and it takes 560 years to circle the Sun.

How does Xena compare to the other planets? Let’s look at the statistics.

Source: NASA.

1Some astronomers no longer consider Pluto a planet.

With these statistics, we can make some comparisons. For example, Xena is about the size of the planet Mars, but it is over 21 times the size of Pluto. (Compare the volumes.) It takes about twice as long to circle the Sun as Pluto. What other comparisons can you make?

Applying the Concepts 1–1

Attendance and Grades

Read the following on attendance and grades, and answer the questions.

A study conducted at Manatee Community College revealed that students who attended class 95 to 100% of the time usually received an A in the class. Students who attended class 80 to 90% of the time usually received a B or C in the class. Students who attended class less than 80% of the time usually received a D or an F or eventually withdrew from the class.

Page 6

Based on this information, attendance and grades are related. The more you attend class, the more likely you will receive a higher grade. If you improve your attendance, your grades will probably improve. Many factors affect your grade in a course. One factor that you have considerable control over is attendance. You can increase your opportunities for learning by attending class more often.

Unusual Stat

Only one-third of crimes committed are reported to the police.

1.What are the variables under study?

2.What are the data in the study?

3.Are descriptive, inferential, or both types of statistics used?

4.What is the population under study?

5.Was a sample collected? If so, from where?

6.From the information given, comment on the relationship between the variables.

See page 33 for the answers.

Objective 3

Identify types of data.

1–2Variables and Types of Data

As stated in Section 1–1 , statisticians gain information about a particular situation by collecting data for random variables. This section will explore in greater detail the nature of variables and types of data.

Variables can be classified as qualitative or quantitative. Qualitative variables are variables that can be placed into distinct categories, according to some characteristic or attribute. For example, if subjects are classified according to gender (male or female), then the variable gender is qualitative. Other examples of qualitative variables are religious preference and geographic locations.

Quantitative variables are numerical and can be ordered or ranked. For example, the variable age is numerical, and people can be ranked in order according to the value of their ages. Other examples of quantitative variables are heights, weights, and body temperatures.

Quantitative variables can be further classified into two groups: discrete and continuous. Discrete variables can be assigned values such as 0, 1, 2, 3 and are said to be countable. Examples of discrete variables are the number of children in a family, the number of students in a classroom, and the number of calls received by a switchboard operator each day for a month.

Discrete variables assume values that can be counted.

Continuous variables , by comparison, can assume an infinite number of values in an interval between any two specific values. Temperature, for example, is a continuous variable, since the variable can assume an infinite number of values between any two given temperatures.

Continuous variables can assume an infinite number of values between any two specific values. They are obtained by measuring. They often include fractions and decimals.

The classification of variables can be summarized as follows:

Page 7

Since continuous data must be measured, answers must be rounded because of the limits of the measuring device. Usually, answers are rounded to the nearest given unit. For example, heights might be rounded to the nearest inch, weights to the nearest ounce, etc. Hence, a recorded height of 73 inches could mean any measure from 72.5 inches up to but not including 73.5 inches. Thus, the boundary of this measure is given as 72.5–73.5 inches. Boundaries are written for convenience as 72.5–73.5 but are understood to mean all values up to but not including 73.5. Actual data values of 73.5 would be rounded to 74 and would be included in a class with boundaries of 73.5 up to but not including 74.5, written as 73.5–74.5. As another example, if a recorded weight is 86 pounds, the exact boundaries are 85.5 up to but not including 86.5, written as 85.5–86.5 pounds. Table 1–1 helps to clarify this concept. The boundaries of a continuous variable are given in one additional decimal place and always end with the digit 5.

Unusual Stat

Fifty-two percent of Americans live within 50 miles of a coastal shoreline.

Table 1–1

Recorded Values and Boundaries

Variable

Recorded value

Boundaries

Length

15 centimeters (cm)

14.5–15.5 cm

Temperature

86 degrees Fahrenheit (°F)

85.5–86.5°F

Time

0.43 second (sec)

0.425–0.435 sec

Mass

1.6 grams (g)

1.55–1.65 g

Objective 4

Identify the measurement level for each variable.

In addition to being classified as qualitative or quantitative, variables can be classified by how they are categorized, counted, or measured. For example, can the data be organized into specific categories, such as area of residence (rural, suburban, or urban)? Can the data values be ranked, such as first place, second place, etc.? Or are the values obtained from measurement, such as heights, IQs, or temperature? This type of classification—i.e., how variables are categorized, counted, or measured—uses measurement scales, and four common types of scales are used: nominal, ordinal, interval, and ratio.

The first level of measurement is called the nominal level of measurement . A sample of college instructors classified according to subject taught (e.g., English, history, psychology, or mathematics) is an example of nominal-level measurement. Classifying survey subjects as male or female is another example of nominal-level measurement. No ranking or order can be placed on the data. Classifying residents according to zip codes is also an example of the nominal level of measurement. Even though numbers are assigned as zip codes, there is no meaningful order or ranking. Other examples of nominal-level data are political party (Democratic, Republican, Independent, etc.), religion (Christianity, Judaism, Islam, etc.), and marital status (single, married, divorced, widowed, separated).

The nominal level of measurement classifies data into mutually exclusive (nonoverlapping), exhausting categories in which no order or ranking can be imposed on the data.

The next level of measurement is called the ordinal level . Data measured at this level can be placed into categories, and these categories can be ordered, or ranked. For example, from student evaluations, guest speakers might be ranked as superior, average, or poor. Floats in a homecoming parade might be ranked as first place, second place, etc. Note that precise measurement of differences in the ordinal level of measurement does not exist. For instance, when people are classified according to their build (small, medium, or large), a large variation exists among the individuals in each class.

Page 8

Other examples of ordinal data are letter grades (A, B, C, D, F).

Unusual Stat

Sixty-three percent of us say we would rather hear the bad news first.

The ordinal level of measurement classifies data into categories that can be ranked; however, precise differences between the ranks do not exist.

The third level of measurement is called the interval level . This level differs from the ordinal level in that precise differences do exist between units. For example, many standardized psychological tests yield values measured on an interval scale. IQ is an example of such a variable. There is a meaningful difference of 1 point between an IQ of 109 and an IQ of 110. Temperature is another example of interval measurement, since there is a meaningful difference of 1°F between each unit, such as 72 and 73°F. One property is lacking in the interval scale: There is no true zero. For example, IQ tests do not measure people who have no intelligence. For temperature, 0°F does not mean no heat at all.

The interval level of measurement ranks data, and precise differences between units of measure do exist; however, there is no meaningful zero.

The final level of measurement is called the ratio level . Examples of ratio scales are those used to measure height, weight, area, and number of phone calls received. Ratio scales have differences between units (1 inch, 1 pound, etc.) and a true zero. In addition, the ratio scale contains a true ratio between values. For example, if one person can lift 200 pounds and another can lift 100 pounds, then the ratio between them is 2 to 1. Put another way, the first person can lift twice as much as the second person.

The ratio level of measurement possesses all the characteristics of interval measurement, and there exists a true zero. In addition, true ratios exist when the same variable is measured on two different members of the population.

There is not complete agreement among statisticians about the classification of data into one of the four categories. For example, some researchers classify IQ data as ratio data rather than interval. Also, data can be altered so that they fit into a different category. For instance, if the incomes of all professors of a college are classified into the three categories of low, average, and high, then a ratio variable becomes an ordinal variable. Table 1–2 gives some examples of each type of data.

Table 1–2

Examples of Measurement Scales

Page 9

Applying the Concepts 1–2

Safe Travel

Read the following information about the transportation industry and answer the questions.

Transportation Safety

The chart shows the number of job-related injuries for each of the transportation industries for 1998.

Industry

Number of injuries

Railroad

4520

Intercity bus

5100

Subway

6850

Trucking

7144

Airline

9950

1.What are the variables under study?

2.Categorize each variable as quantitative or qualitative.

3.Categorize each quantitative variable as discrete or continuous.

4.Identify the level of measurement for each variable.

5.The railroad is shown as the safest transportation industry. Does that mean railroads have fewer accidents than the other industries? Explain.

6.What factors other than safety influence a person’s choice of transportation?

7.From the information given, comment on the relationship between the variables.

See page 33 for the answers.

Objective 5

Identify the four basic sampling techniques.

1–3Data Collection and Sampling Techniques

In research, statisticians use data in many different ways. As stated previously, data can be used to describe situations or events. For example, a manufacturer might want to know something about the consumers who will be purchasing his product so he can plan an effective marketing strategy. In another situation, the management of a company might survey its employees to assess their needs in order to negotiate a new contract with the employees’ union. Data can be used to determine whether the educational goals of a school district are being met. Finally, trends in various areas, such as the stock market, can be analyzed, enabling prospective buyers to make more intelligent decisions concerning what stocks to purchase. These examples illustrate a few situations where collecting data will help people make better decisions on courses of action.

Data can be collected in a variety of ways. One of the most common methods is through the use of surveys. Surveys can be done by using a variety of methods. Three of the most common methods are the telephone survey, the mailed questionnaire, and the personal interview.

Telephone surveys have an advantage over personal interview surveys in that they are less costly. Also, people may be more candid in their opinions since there is no face-to-face contact. A major drawback to the telephone survey is that some people in the population will not have phones or will not answer when the calls are made; hence, not all people have a chance of being surveyed. Also, many people now have unlisted numbers and cell phones, so they cannot be surveyed. Finally, even the tone of the voice of the interviewer might influence the response of the person who is being interviewed.

Mailed questionnaire surveys can be used to cover a wider geographic area than telephone surveys or personal interviews since mailed questionnaire surveys are less expensive to conduct. Also, respondents can remain anonymous if they desire. Disadvantages of mailed questionnaire surveys include a low number of responses and inappropriate answers to questions. Another drawback is that some people may have difficulty reading or understanding the questions.

Page 10

Historical Note

A pioneer in census taking was Pierre-Simon de Laplace. In 1780, he developed the Laplace method of estimating the population of a country. The principle behind his method was to take a census of a few selected communities and to determine the ratio of the population to the number of births in these communities. (Good birth records were kept.) This ratio would be used to multiply the number of births in the entire country to estimate the number of citizens in the country.

Personal interview surveys have the advantage of obtaining in-depth responses to questions from the person being interviewed. One disadvantage is that interviewers must be trained in asking questions and recording responses, which makes the personal interview survey more costly than the other two survey methods. Another disadvantage is that the interviewer may be biased in his or her selection of respondents.

Data can also be collected in other ways, such as surveying records or direct observation of situations.

As stated in Section 1–1 , researchers use samples to collect data and information about a particular variable from a large population. Using samples saves time and money and in some cases enables the researcher to get more detailed information about a particular subject. Samples cannot be selected in haphazard ways because the information obtained might be biased. For example, interviewing people on a street corner during the day would not include responses from people working in offices at that time or from people attending school; hence, not all subjects in a particular population would have a chance of being selected.

To obtain samples that are unbiased—i.e., that give each subject in the population an equally likely chance of being selected—statisticians use four basic methods of sampling: random, systematic, stratified, and cluster sampling.

Random Sampling

Random samples are selected by using chance methods or random numbers. One such method is to number each subject in the population. Then place numbered cards in a bowl, mix them thoroughly, and select as many cards as needed. The subjects whose numbers are selected constitute the sample. Since it is difficult to mix the cards thoroughly, there is a chance of obtaining a biased sample. For this reason, statisticians use another method of obtaining numbers. They generate random numbers with a computer or calculator. Before the invention of computers, random numbers were obtained from tables.

Some two-digit random numbers are shown in Table 1–3 . To select a random sample of, say, 15 subjects out of 85 subjects, it is necessary to number each subject from 01 to 85. Then select a starting number by closing your eyes and placing your finger on a number in the table. (Although this may sound somewhat unusual, it enables us to find a starting number at random.) In this case suppose your finger landed on the number 12 in the second column. (It is the sixth number down from the top.) Then proceed downward until you have selected 15 different numbers between 01 and 85. When you reach the bottom of the column, go to the top of the next column. If you select a number greater than 85 or the number 00 or a duplicate number, just omit it. In our example, we will use the subjects numbered 12, 27, 75, 62, 57, 13, 31, 06, 16, 49, 46, 71, 53, 41, and 02.

Page 11

Speaking of Statistics

Commuting Times

This graph shows the highest average commuting times for cities with a population of 250,000 or more.

This graph shows the cities with the lowest average commuting times.

Source: U.S. Census Bureau.

By looking at the locations of the cities, what conclusions can you draw?

Systematic Sampling

Researchers obtain systematic samples by numbering each subject of the population and then selecting every kth subject. For example, suppose there were 2000 subjects in the population and a sample of 50 subjects were needed. Since 2000 ÷ 50 = 40, then k = 40, and every 40th subject would be selected; however, the first subject (numbered between 1 and 40) would be selected at random. Suppose subject 12 were the first subject selected; then the sample would consist of the subjects whose numbers were 12, 52, 92, etc., until 50 subjects were obtained. When using systematic sampling, you must be careful about how the subjects in the population are numbered. If subjects were arranged in a manner such as wife, husband, wife, husband, and every 40th subject were selected, the sample would consist of all husbands. Numbering is not always necessary. For example, a researcher may select every tenth item from an assembly line to test for defects.

Page 12

Table 1–3

Random Numbers

Stratified Sampling

Researchers obtain stratified samples by dividing the population into groups (called strata) according to some characteristic that is important to the study, then sampling from each group. Samples within the strata should be randomly selected. For example, suppose the president of a two-year college wants to learn how students feel about a certain issue. Furthermore, the president wishes to see if the opinions of the first-year students differ from those of the second-year students. The president will select students from each group to use in the sample.

Historical Note

In 1936, the Literary Digest, on the basis of a biased sample of its subscribers, predicted that Alf Landon would defeat Franklin D. Roosevelt in the upcoming presidential election. Roosevelt won by a landslide. The magazine ceased publication the following year.

Cluster Sampling

Researchers also use cluster samples. Here the population is divided into groups called clusters by some means such as geographic area or schools in a large school district, etc. Then the researcher randomly selects some of these clusters and uses all members of the selected clusters as the subjects of the samples. Suppose a researcher wishes to survey apartment dwellers in a large city. If there are 10 apartment buildings in the city, the researcher can select at random 2 buildings from the 10 and interview all the residents of these buildings. Cluster sampling is used when the population is large or when it involves subjects residing in a large geographic area. For example, if one wanted to do a study involving the patients in the hospitals in New York City, it would be very costly and time-consuming to try to obtain a random sample of patients since they would be spread over a large area. Instead, a few hospitals could be selected at random, and the patients in these hospitals would be interviewed in a cluster.

The four basic sampling methods are summarized in Table 1–4 .

Page 13

Table 1–4

Summary of Sampling Methods

Random

Subjects are selected by random numbers.

Systematic

Subjects are selected by using every kth number after the first subject is randomly selected from 1 through k.

Stratified

Subjects are selected by dividing up the population into groups (strata), and subjects are randomly selected within groups.

Cluster

Subjects are selected by using an intact group that is representative of the population.

Other Sampling Methods

In addition to the four basic sampling methods, researchers use other methods to obtain samples. One such method is called a convenience sample. Here a researcher uses subjects that are convenient. For example, the researcher may interview subjects entering a local mall to determine the nature of their visit or perhaps what stores they will be patronizing. This sample is probably not representative of the general customers for several reasons. For one thing, it was probably taken at a specific time of day, so not all customers entering the mall have an equal chance of being selected since they were not there when the survey was being conducted. But convenience samples can be representative of the population. If the researcher investigates the characteristics of the population and determines that the sample is representative, then it can be used.

Interesting Fact

Older Americans are less likely to sacrifice happiness for a higherpaying job. According to one survey, 38% of those aged 18–29 said they would choose more money over happiness, while only 3% of those over 65 would.

Applying the Concepts 1–3

American Culture and Drug Abuse

Assume you are a member of the Family Research Council and have become increasingly concerned about the drug use by professional sports players. You set up a plan and conduct a survey on how people believe the American culture (television, movies, magazines, and popular music) influences illegal drug use. Your survey consists of 2250 adults and adolescents from around the country. A consumer group petitions you for more information about your survey. Answer the following questions about your survey.

1.What type of survey did you use (phone, mail, or interview)?

2.What are the advantages and disadvantages of the surveying methods you did not use?

3.What type of scores did you use? Why?

4.Did you use a random method for deciding who would be in your sample?

5.Which of the methods (stratified, systematic, cluster, or convenience) did you use?

6.Why was that method more appropriate for this type of data collection?

7.If a convenience sample were obtained, consisting of only adolescents, how would the results of the study be affected?

See page 33 for the answers.

Objective 6

Explain the difference between an observational and an experimental study.

1–4Observational and Experimental Studies

There are several different ways to classify statistical studies. This section explains two types of studies: observational studies and experimental studies .

In an observational study, the researcher merely observes what is happening or what has happened in the past and tries to draw conclusions based on these observations.

Page 14

For example, data from the Motorcycle Industry Council (USA TODAY) stated that “Motorcycle owners are getting older and richer.” Data were collected on the ages and incomes of motorcycle owners for the years 1980 and 1998 and then compared. The findings showed considerable differences in the ages and incomes of motorcycle owners for the two years.

In this study, the researcher merely observed what had happened to the motorcycle owners over a period of time. There was no type of research intervention.

In an experimental study, the researcher manipulates one of the variables and tries to determine how the manipulation influences other variables.

Interesting Fact

The safest day of the week for driving is Tuesday.

For example, a study conducted at Virginia Polytechnic Institute and presented in Psychology Today divided female undergraduate students into two groups and had the students perform as many sit-ups as possible in 90 sec. The first group was told only to “Do your best,” while the second group was told to try to increase the actual number of sit-ups done each day by 10%. After four days, the subjects in the group who were given the vague instructions to “Do your best” averaged 43 sit-ups, while the group that was given the more specific instructions to increase the number of sit-ups by 10% averaged 56 sit-ups by the last day’s session. The conclusion then was that athletes who were given specific goals performed better than those who were not given specific goals.

This study is an example of a statistical experiment since the researchers intervened in the study by manipulating one of the variables, namely, the type of instructions given to each group.

In a true experimental study, the subjects should be assigned to groups randomly. Also, the treatments should be assigned to the groups at random. In the sit-up study, the article did not mention whether the subjects were randomly assigned to the groups.

Sometimes when random assignment is not possible, researchers use intact groups. These types of studies are done quite often in education where already intact groups are available in the form of existing classrooms. When these groups are used, the study is said to be a quasi-experimental study. The treatments, though, should be assigned at random. Most articles do not state whether random assignment of subjects was used.

Statistical studies usually include one or more independent variables and one dependent variable .

The independent variable in an experimental study is the one that is being manipulated by the researcher. The independent variable is also called the explanatory variable. The resultant variable is called the dependent variable or the outcome variable.

The outcome variable is the variable that is studied to see if it has changed significantly due to the manipulation of the independent variable. For example, in the sit-up study, the researchers gave the groups two different types of instructions, general and specific. Hence, the independent variable is the type of instruction. The dependent variable, then, is the resultant variable, that is, the number of sit-ups each group was able to perform after four days of exercise. If the differences in the dependent or outcome variable are large and other factors are equal, these differences can be attributed to the manipulation of the independent variable. In this case, specific instructions were shown to increase athletic performance.

In the sit-up study, there were two groups. The group that received the special instruction is called the treatment group while the other is called the control group. The treatment group receives a specific treatment (in this case, instructions for improvement) while the control group does not.

Both types of statistical studies have advantages and disadvantages. Experimental studies have the advantage that the researcher can decide how to select subjects and how to assign them to specific groups. The researcher can also control or manipulate the independent variable. For example, in studies that require the subjects to consume a certain amount of medicine each day, the researcher can determine the precise dosages and, if necessary, vary the dosage for the groups.

Page 15

Interesting Fact

The number of potholes in the United States is about 56 million.

There are several disadvantages to experimental studies. First, they may occur in unnatural settings, such as laboratories and special classrooms. This can lead to several problems. One such problem is that the results might not apply to the natural setting. The age-old question then is, “This mouthwash may kill 10,000 germs in a test tube, but how many germs will it kill in my mouth?”

Another disadvantage with an experimental study is the Hawthorne effect. This effect was discovered in 1924 in a study of workers at the Hawthorne plant of the Western Electric Company. In this study, researchers found that the subjects who knew they were participating in an experiment actually changed their behavior in ways that affected the results of the study.

Another problem is called confounding of variables .

A confounding variable is one that influences the dependent or outcome variable but was not separated from the independent variable.

Researchers try to control most variables in a study, but this is not possible in some studies. For example, subjects who are put on an exercise program might also improve their diet unbeknownst to the researcher and perhaps improve their health in other ways not due to exercise alone. Then diet becomes a confounding variable.

Observational studies also have advantages and disadvantages. One advantage of an observational study is that it usually occurs in a natural setting. For example, researchers can observe people’s driving patterns on streets and highways in large cities. Another advantage of an observational study is that it can be done in situations where it would be unethical or downright dangerous to conduct an experiment. Using observational studies, researchers can study suicides, rapes, murders, etc. In addition, observational studies can be done using variables that cannot be manipulated by the researcher, such as drug users versus nondrug users and right-handedness versus left-handedness.

Observational studies have disadvantages, too. As mentioned previously, since the variables are not controlled by the researcher, a definite cause-and-effect situation cannot be shown since other factors may have had an effect on the results. Observational studies can be expensive and time-consuming. For example, if one wanted to study the habitat of lions in Africa, one would need a lot of time and money, and there would be a certain amount of danger involved. Finally, since the researcher may not be using his or her own measurements, the results could be subject to the inaccuracies of those who collected the data. For example, if the researchers were doing a study of events that occurred in the 1800s, they would have to rely on information and records obtained by others from a previous era. There is no way to ensure the accuracy of these records.

When you read the results of statistical studies, decide if the study was observational or experimental. Then see if the conclusion follows logically, based on the nature of these studies.

Unusual Stat

Of people in the United States, 66% read the Sunday paper.

No matter what type of study is conducted, two studies on the same subject sometimes have conflicting conclusions. Why might this occur? An article entitled “Bottom Line: Is It Good for You?” (USA TODAY Weekend) states that in the 1960s studies suggested that margarine was better for the heart than butter since margarine contains less saturated fat and users had lower cholesterol levels. In a 1980 study, researchers found that butter was better than margarine since margarine contained trans-fatty acids, which are worse for the heart than butter’s saturated fat. Then in a 1998 study, researchers found that margarine was better for a person’s health. Now, what is to be believed? Should one use butter or margarine?

Page 16

The answer here is that you must take a closer look at these studies. Actually, it is not a choice between butter or margarine that counts, but the type of margarine used. In the 1980s, studies showed that solid margarine contains trans-fatty acids, and scientists believe that they are worse for the heart than butter’s saturated fat. In the 1998 study, liquid margarine was used. It is very low in trans-fatty acids, and hence it is more healthful than butter because trans-fatty acids have been shown to raise cholesterol. Hence, the conclusion is to use liquid margarine instead of solid margarine or butter.

Before decisions based on research studies are made, it is important to get all the facts and examine them in light of the particular situation.

Applying the Concepts 1–4

Just a Pinch Between Your Cheek and Gum

As the evidence on the adverse effects of cigarette smoke grew, people tried many different ways to quit smoking. Some people tried chewing tobacco or, as it was called, smokeless tobacco. A small amount of tobacco was placed between the cheek and gum. Certain chemicals from the tobacco were absorbed into the bloodstream and gave the sensation of smoking cigarettes. This prompted studies on the adverse effects of smokeless tobacco. One study in particular used 40 university students as subjects. Twenty were given smokeless tobacco to chew, and twenty given a substance that looked and tasted like smokeless tobacco, but did not contain any of the harmful substances. The students were randomly assigned to one of the groups. The students’ blood pressure and heart rate were measured before they started chewing and 20 minutes after they had been chewing. A significant increase in heart rate occurred in the group that chewed the smokeless tobacco. Answer the following questions.

1.What type of study was this (observational, quasi-experimental, or experimental)?

2.What are the independent and dependent variables?

3.Which was the treatment group?

4.Could the students’ blood pressures be affected by knowing that they are part of a study?

5.List some possible confounding variables.

6.Do you think this is a good way to study the effect of smokeless tobacco?

See page 33 for the answers.

Objective 7

Explain how statistics can be used and misused.

1–5Uses and Misuses of Statistics

As explained previously, statistical techniques can be used to describe data, compare two or more data sets, determine if a relationship exists between variables, test hypotheses, and make estimates about population characteristics. However, there is another aspect of statistics, and that is the misuse of statistical techniques to sell products that don’t work properly, to attempt to prove something true that is really not true, or to get our attention by using statistics to evoke fear, shock, and outrage.

There are two sayings that have been around for a long time that illustrate this point:

“There are three types of lies—lies, damn lies, and statistics.”

“Figures don’t lie, but liars figure.”

Page 17

Just because we read or hear the results of a research study or an opinion poll in the media, this does not mean that these results are reliable or that they can be applied to any and all situations. For example, reporters sometimes leave out critical details such as the size of the sample used or how the research subjects were selected. Without this information, you cannot properly evaluate the research and properly interpret the conclusions of the study or survey.

It is the purpose of this section to show some ways that statistics can be misused. You should not infer that all research studies and surveys are suspect, but that there are many factors to consider when making decisions based on the results of research studies and surveys. Here are some ways that statistics can be misrepresented.

Suspect Samples

The first thing to consider is the sample that was used in the research study. Sometimes researchers use very small samples to obtain information. Several years ago, advertisements contained such statements as “Three out of four doctors surveyed recommend brand such and such.” If only 4 doctors were surveyed, the results could have been obtained by chance alone; however, if 100 doctors were surveyed, the results might be quite different.

Not only is it important to have a sample size that is large enough, but also it is necessary to see how the subjects in the sample were selected. Studies using volunteers sometimes have a built-in bias. Volunteers generally do not represent the population at large. Sometimes they are recruited from a particular socioeconomic background, and sometimes unemployed people volunteer for research studies to get a stipend. Studies that require the subjects to spend several days or weeks in an environment other than their home or workplace automatically exclude people who are employed and cannot take time away from work. Sometimes only college students or retirees are used in studies. In the past, many studies have used only men, but have attempted to generalize the results to both men and women. Opinion polls that require a person to phone or mail in a response most often are not representative of the population in general, since only those with strong feelings for or against the issue usually call or respond by mail.

Another type of sample that may not be representative is the convenience sample. Educational studies sometimes use students in intact classrooms since it is convenient. Quite often, the students in these classrooms do not represent the student population of the entire school district.

When results are interpreted from studies using small samples, convenience samples, or volunteer samples, care should be used in generalizing the results to the entire population.

Ambiguous Averages

In Chapter 3 , you will learn that there are four commonly used measures that are loosely called averages. They are the mean, median, mode, and midrange. For the same data set, these averages can differ markedly. People who know this can, without lying, select the one measure of average that lends the most evidence to support their position.

Changing the Subject

Another type of statistical distortion can occur when different values are used to represent the same data. For example, one political candidate who is running for reelection might say, “During my administration, expenditures increased a mere 3%.” His opponent, who is trying to unseat him, might say, “During my opponent’s administration, expenditures have increased a whopping $6,000,000.” Here both figures are correct; however, expressing a 3% increase as $6,000,000 makes it sound like a very large increase. Here again, ask yourself, Which measure better represents the data?

Page 18

Detached Statistics

A claim that uses a detached statistic is one in which no comparison is made. For example, you may hear a claim such as “Our brand of crackers has one-third fewer calories.” Here, no comparison is made. One-third fewer calories than what? Another example is a claim that uses a detached statistic such as “Brand A aspirin works four times faster.” Four times faster than what? When you see statements such as this, always ask yourself, Compared to what?

Implied Connections

Many claims attempt to imply connections between variables that may not actually exist. For example, consider the following statement: “Eating fish may help to reduce your cholesterol.” Notice the words may help. There is no guarantee that eating fish will definitely help you reduce your cholesterol.

“Studies suggest that using our exercise machine will reduce your weight.” Here the word suggest is used; and again, there is no guarantee that you will lose weight by using the exercise machine advertised.

Another claim might say, “Taking calcium will lower blood pressure in some people.” Note the word some is used. You may not be included in the group of “some” people. Be careful when you draw conclusions from claims that use words such as may, in some people, and might help.

Misleading Graphs

Statistical graphs give a visual representation of data that enables viewers to analyze and interpret data more easily than by simply looking at numbers. In Chapter 2 , you will see how some graphs are used to represent data. However, if graphs are drawn inappropriately, they can misrepresent the data and lead the reader to draw false conclusions. The misuse of graphs is also explained in Chapter 2 .

Faulty Survey Questions

When analyzing the results of a survey using questionnaires, you should be sure that the questions are properly written since the way questions are phrased can often influence the way people answer them. For example, the responses to a question such as “Do you feel that the North Huntingdon School District should build a new football stadium?” might be answered differently than a question such as “Do you favor increasing school taxes so that the North Huntingdon School District can build a new football stadium?” Each question asks something a little different, and the responses could be radically different. When you read and interpret the results obtained from questionnaire surveys, watch out for some of these common mistakes made in the writing of the survey questions.

To restate the premise of this section, statistics, when used properly, can be beneficial in obtaining much information, but when used improperly, can lead to much misinformation. It is like your automobile. If you use your automobile to get to school or work or to go on a vacation, that’s good. But if you use it to run over your neighbor’s dog because it barks all night long and tears up your flower garden, that’s not so good!

Page 19

Objective 8

Explain the importance of computers and calculators in statistics.

1–6Computers and Calculators

In the past, statistical calculations were done with pencil and paper. However, with the advent of calculators, numerical computations became much easier. Computers do all the numerical calculation. All one does is to enter the data into the computer and use the appropriate command; the computer will print the answer or display it on the screen. Now the TI-83 Plus or TI-84 Plus graphing calculator accomplishes the same thing.

There are many statistical packages available; this book uses MINITAB and Microsoft Excel. Instructions for using MINITAB, the TI-83 Plus or TI-84 Plus graphing calculator, and Excel have been placed at the end of each relevant section, in subsections entitled Technology Step by Step.

You should realize that the computer and calculator merely give numerical answers and save the time and effort of doing calculations by hand. You are still responsible for understanding and interpreting each statistical concept. In addition, you should realize that the results come from the data and do not appear magically on the computer. Doing calculations using the procedure tables will help you reinforce this idea.

The author has left it up to instructors to choose how much technology they will incorporate into the course.

Technology Step by Step

MINITAB

Step by Step

General Information

MINITAB statistical software provides a wide range of statistical analysis and graphing capabilities.

Take Note

In this text you will see captured screen images from computers running MINITAB Release 14. If you are using an earlier or later release of MINITAB, the screens you see on your computer may bear slight visual differences from the screens pictured in this text. But don’t be alarmed! All the Step by Step operations described in this text, including the commands, the menu options, and the functionality, will work just fine on your computer.

Start the Program

1.Click the Windows XP Start Menu, then All Programs.

2.Click the MINITAB 14 folder and then click , the program icon. The program screen will look similar to the one shown here. You will see the Session Window, the Worksheet Window, and perhaps the Project Manager Window.

3.Click the Project Manager icon on the toolbar to bring the project manager to the front.

For Vista, click the start button, then “All Programs.” Next click “MINITAB Solutions” and then “MINITAB Statistical Software English.”

Page 20

To use the program, data must be entered from the keyboard or from a file.

Entering Data in MINITAB

In MINITAB, all the data for one variable are stored in a column. Step by step instructions for entering these data follow.

Data

213208203215222

1.Click in row 1 of Worksheet 1***. This makes the worksheet the active window and puts the cursor in the first cell. The small data entry arrow in the upper left-hand corner of the worksheet should be pointing down. If it is not, click it to change the direction in which the cursor will move when you press the [Enter] key.

2.Type in each number, pressing [Enter] after each entry, including the last number typed.

3. Optional: Click in the space above row 1 to type in Weight, the column label.

Save a Worksheet File

4.Click on the File Menu. Note: This is not the same as clicking the disk icon .

5.Click Save Current Worksheet As …

6.In the dialog box you will need to verify three items:

a)Save in:Click on or type in the disk drive and directory where you will store your data. For a CD this would be A:.

b)File Name:Type in the name of the file, such as MyData.

c)Save as Type:The default here is MINITAB. An extension of mtw is added to the name.

Click [Save]. The name of the worksheet will change from Worksheet 1*** to MyData.MTW.

Open the Databank File

The raw data are shown in Appendix D . There is a row for each person’s data and a column for each variable. MINITAB data files comprised of data sets used in this book, including the Databank, are available on the accompanying CD-ROM or at the Online Learning Center ( www.mhhe.com/bluman ). Here is how to get the data from a file into a worksheet.

Page 21

1.Click File>Open Worksheet. A sequence of menu instructions will be shown this way.

Note: This is not the same as clicking the file icon . If the dialog box says Open Project instead of Open Worksheet, click [Cancel] and use the correct menu item. The Open Worksheet dialog box will be displayed.

2.You must check three items in this dialog box.

a)The Look In: dialog box should show the directory where the file is located.

b)Make sure the Files of Type: shows the correct type, MINITAB [*.mtw].

c)Double-click the file name in the list box Databank.mtw. A dialog box may inform you that a copy of this file is about to be added to the project. Click on the checkbox if you do not want to see this warning again.

3.Click the [OK] button. The data will be copied into a second worksheet. Part of the worksheet is shown here.

a)You may maximize the window and scroll if desired.

b)C12-T Marital Status has a T appended to the label to indicate alphanumeric data. MyData.MTW is not erased or overwritten. Multiple worksheets can be available; however, only the active worksheet is available for analysis.

4.To switch between the worksheets, select Window>MyData.MTW.

5.Select File>Exit to quit. To save the project, click [Yes].

6.Type in the name of the file, Chapter01. The Data Window, the Session Window, and settings are all in one file called a project. Projects have an extension of mpj instead of mtw.

Clicking the disk icon on the menu bar is the same as selecting File>Save Project.

Clicking the file icon is the same as selecting File>Open Project.

7.Click [Save]. The mpj extension will be added to the name. The computer will return to the Windows desktop. The two worksheets, the Session Window results, and settings are saved in this project file. When a project file is opened, the program will start up right where you left off.

TI-83 Plus or TI-84 Plus

Step by Step

The TI-83 Plus or TI-84 Plus graphing calculator can be used for a variety of statistical graphs and tests.

General Information

To turn calculator on:

Press ON key.

To turn calculator off:

Press 2nd [OFF].

To reset defaults only:

1.Press 2nd, then [MEM].

2.Select 7, then 2, then 2.

Optional. To reset settings on calculator and clear memory: (Note: This will clear all settings and programs in the calculator’s memory.)

Press 2nd, then [MEM]. Then press 7, then 1, then 2.

(Also, the contrast may need to be adjusted after this.)

Page 22

To adjust contrast (if necessary):

Press 2nd. Then press and hold ▲ to darken or ▼ to lighten contrast.

To clear screen:

Press CLEAR.

(Note: This will return you to the screen you were using.)

To display a menu:

Press appropriate menu key. Example: STAT.

To return to home screen:

Press 2nd, then [QUIT].

To move around on the screens:

Use the arrow keys.

To select items on the menu:

Press the corresponding number or move the cursor to the item, using the arrow keys. Then press ENTER.

(Note: In some cases, you do not have to press ENTER, and in other cases you may need to press ENTER twice.)

Entering Data

To enter single-variable data (if necessary, clear the old list):

1.Press STAT to display the Edit menu.

2.Press ENTER to select 1:Edit.

3.Enter the data in L1 and press ENTER after each value.

4.After all data values are entered, press STAT to get back to the Edit menu or 2nd [QUIT] to end.

Example TI1–1

Enter the following data values in L1: 213, 208, 203, 215, 222.

To enter multiple-variable data:

The TI-83 Plus or TI-84 Plus will take up to six lists designated L1, L2, L3, L4, L5, and L6.

1.To enter more than one set of data values, complete the preceding steps. Then move the cursor to L2 by pressing the ▸ key.

2.Repeat the steps in the preceding part.

Editing Data

To correct a data value before pressing ENTER, use ◀ and retype the value and press ENTER.

To correct a data value in a list after pressing ENTER, move cursor to incorrect value in list and type in the correct value. Then press ENTER.

To delete a data value in a list:

Move cursor to value and press DEL.

To insert a data value in a list:

1.Move cursor to position where data value is to be inserted, then press 2nd [INS].

2.Type data value; then press ENTER.

To clear a list:

1.Press STAT, then 4.

2.Enter list to be cleared. Example: To clear L1, press 2nd [L1]. Then press ENTER.

(Note: To clear several lists, follow step 1, but enter each list to be cleared, separating them with commas. To clear all lists at once, follow step 1 then press ENTER.)

Page 23

Sorting Data

To sort the data in a list:

1.Enter the data in L1.

2.Press STAT 2 to get SortA to sort the list in ascending order.

3.Then press 2nd [L1] ENTER.

The calculator will display Done.

4.Press STAT ENTER to display sorted list.

(Note: The SortD or 3 sorts the list in descending order.)

Example TI1–2

Sort in ascending order the data values entered in Example TI1–1.

Excel

Step by Step

Excel’s Analysis ToolPak Add-In

General Information

Microsoft Excel 2007 has two different ways to solve statistical problems. First, there are built-in functions, such as STDEV and CHITEST, available from the standard toolbar by clicking

Formulas, then selecting the Insert Function icon . Another feature of Excel that is useful for calculating multiple statistical measures and performing statistical tests for a set of data is the Data Analysis command found in the Analysis Tool-Pak Add-in.

To load the Analysis Tool-Pak:

Click the Microsoft Office button , then select Excel Options.

1.Click Add-Ins, and select Add-ins from the list of options on the left side of the options box.

2.Select the Analysis Tool-Pak, then click the Go button at the bottom of the options box.

Page 24

3.After loading the Analysis Tool-Pak, the Data Analysis command is available in the Analysis group on the Data tab.

MegaStat

Later in this text you will encounter a few Excel Technology Step by Step operations that will require the use of the MegaStat Add-in for Excel. MegaStat can be downloaded from the CD that came with your textbook as well as from the text’s Online Learning Center at www.mhhe.com/bluman .

1.Save the Zip file containing the MegaStat Excel Add-in file (MegaStat.xls) and the associated help file on your computer’s hard drive.

2.After opening the Zip file, double-click the MegaStat Add-in file, then Extract the MegaStat program to your computer’s hard drive. After extracting the file, you can load the MegaStat Add-in to Excel by double-clicking the MegaStat.xls file. When the Excel program opens to load the Add-in, choose the Enable Macros option.

3.After installation of the add-in, you will be able to access MegaStat by selecting the Add-ins tab on the Excel toolbar.

4.If MegaStat is not listed under Add-ins when you reopen the Excel program, then you can access MegaStat by double-clicking the MegaStat.xls file at any time.

Entering Data